Behringer AIRPLAY GUITAR AG10

To Next Page

Features

Charging the Battery

1. The Battery Level LEDs will ash twice when each unit is turned ON.

2. Fully charge each unit before using them for the rst time.

3. If the level is low, attach the supplied dual cords to a computer USB output.

4. CAUTION: Do not leave the units unattended while they are charging.

Selecting the Channel

1. Channel 1 is automatically selected each time the units are turned on.

2. Note: Use channel 1 unless you are picking up interference. Each unit must be

on the same channel, or they will not operate.

3. If required, press SEL on each unit to change to a dierent channel. All 4 LEDs

will ash twice and show the channel LED.

4. If the units are on dierent channels, then the 4 LEDs on the receiver will start to ash repeatedly

after a few seconds, until you select the correct channel.

5. The transmitter signals can be received by several receivers set to the same channel.

For example, the signal can be fed to 2 ampliers simultaneously to

generate a stereo sound image.

6. To switch o the transmitter and receiver, rst turn o your

power amplier, and then set both on/o switches to the

OFF position.

BATTERY CHARGE/

CHANNEL LEDS

ON/OFF

CHANNEL SELECT

⁄4" TS

100% Charged Approx 75% Approx 50% Low Battery

USB

Micro USB

Channel 1 Channel 2 Channel 3 Channel 4

ONSEL

Behringer AIRPLAY GUITAR AG10

High-Performance 2.4 GHz Guitar Wireless System with

Ultra-Low Latency and Rechargeable Battery

Quick Start Guide

Important Safety Instructions

WARNING: To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be

performed by qualified service personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not expose a power pack to re or excessive temperature.

Exposure to the re or temperature above 100°C (212°F)

may cause explosion.

8. Do not expose this product to bright sunshine for a long time.

9. Do not disassemble this apparatus. Take it to a qualied service

person when service or repair is required. Incorrect reassembly

may result in a risk of re or injury to persons.

10. Please store this product in a clean and dry environment.

11. Charge it once a month (minimum).

12. Use of a power supply or charger not recommended or sold by

the manufacturer may result in a risk of re or injury to persons.

13. Do not use this apparatus in excess of its output rating.

Overload outputs above rating may result in a risk of re or

injury to persons.

14. Do not use this apparatus if it is damaged or modied.

Damaged or modied batteries may exhibit unpredictable

behavior resulting in re, explosion or risk of injury.

15. Have servicing performed by a qualied repair person using

only identical replacement parts. This will ensure that the

safety of the product is maintained.

16. Switch o this apparatus when not in use.

17. WARNING! Choking and Swallowing Hazard. Keep the

product safely out of reach of children and pets. The small size

and the internal battery present a choking and swallowing

hazard. Failure to follow instructions may lead to permanent

injury or death.

18. WARNING! To prevent possible hearing damage, do not

listen at high volume levels for long periods

19. Correct disposal of this product: This symbol

indicates that this product must not be disposed of

with household waste, according to the WEEE

Directive (2012/19/EU) and your national law. This

product should be taken to a collection center licensed for the

recycling of waste electrical and electronic equipment (EEE). The

mishandling of this type of waste could have a possible negative

impact on the environment and human health due to potentially

hazardous substances that are generally associated with EEE. At

the same time, your cooperation in the correct disposal of this

product will contribute to the ecient use of natural resources. For

more information about where you can take your waste equipment

for recycling, please contact your local city oce, or your

household waste collection service.

Need help?

Do you have a question about the Behringer AIRPLAY GUITAR AG10 and is the answer not in the manual?

Summary

Important Safety Instructions

General Safety Precautions

Covers instructions for water, cleaning, temperature, disassembly, and storage.

Electrical and Operational Safety

Warns about power supply, output ratings, damage, repairs, and overload risks.

Health and Environmental Warnings

Addresses choking hazards, hearing damage, and proper product disposal.

Charging the Battery

Battery Charging Status and Procedure

Explains battery level LEDs, initial charging, and USB charging process.

Selecting the Channel

Channel Selection and Operation Guide

Details automatic channel selection, manual changes, and interference handling.

Product Specifications

RF, Audio, and Power Details

Covers frequency, output power, channels, range, audio parameters, and power.

Environmental and Physical Characteristics

Details operating temperature range, dimensions, and weight of the unit.

Regulatory and Support Information

Legal Disclaimers and Warranty

Includes liability disclaimers, warranty terms, and product registration advice.

FCC Compliance and Interference Advice

Outlines FCC compliance for Class B devices and methods to correct interference.

The Behringer AIRPLAY GUITAR AG10 is a high-performance 2.4 GHz guitar wireless system designed for musicians seeking freedom from cables with ultra-low latency and a rechargeable battery. This system consists of a transmitter and a receiver, both compact and designed for ease of use.

Function Description:

The AIRPLAY GUITAR AG10 system allows a guitar or bass to wirelessly transmit its audio signal to an amplifier or other audio input. The transmitter plugs into the instrument's output, and the receiver plugs into the amplifier's input. It operates on the 2.4 GHz frequency band, providing a reliable wireless connection up to 30 meters (approximately 98 feet). The system aims to deliver a clear, uncompressed audio signal with minimal delay, ensuring that the player's performance remains natural and responsive. Its primary function is to eliminate the need for physical audio cables, offering greater mobility on stage or during practice.

Important Technical Specifications:

RF Connection:
- Frequency: 2.4 GHz
- RF output power: 20 dBm maximum
- Number of channels: 4
- Channel selection: SEL button on each unit
- Channel indicator: 4 LEDs
- Range: 30 meters maximum
Audio:
- Frequency range: 20 Hz to 16 kHz
- Latency: <5ms
- Digital signal parameters: 24 bit/48 kHz
- Transmitter audio input: 1/4" TS
- Receiver audio output: 1/4" TS
Power Supply:
- Type: Internal rechargeable 750 mAh Lithium Battery
- Operating time per battery charge: Up to 6 hours
- Charging method: Duo-pin USB charging cable supplied
- Charge status indicators: 4 LEDs
- Power switch: On/Off slide switch
Environmental:
- Operating temperature range: 5°C - 40°C (41°F - 104°F)
Physical (set):
- Dimensions (H x W x D): 40 x 72 x 32 mm x2 (0.13 x 0.24 x 0.10") x2
- Weight: 0.045 kg (0.02 lbs) x2

Usage Features:

Easy Setup: The system is designed for plug-and-play operation. Both the transmitter and receiver feature a 1/4" TS jack for direct connection to instruments and amplifiers.
Channel Selection: The AG10 offers 4 selectable channels to avoid interference. Channel 1 is automatically selected when the units are turned on. Users can press the "SEL" button on each unit to cycle through channels if interference is detected. It's crucial that both the transmitter and receiver are set to the same channel for proper operation.
Multi-Receiver Capability: The transmitter's signal can be received by multiple receivers set to the same channel. This allows for flexible setups, such as feeding the signal to two amplifiers simultaneously for a stereo sound image or to different destinations.
Compact Design: Both units are small and lightweight, making them unobtrusive when connected to an instrument or amplifier. They can also be clipped together for convenient transportation and storage, enhancing portability.
LED Indicators: Each unit includes 4 LEDs that serve multiple purposes:
- Battery Charge/Level: These LEDs indicate the battery charge status (100%, 75%, 50%, Low Battery). They flash twice when the unit is turned ON.
- Channel Indicator: The LEDs also display the currently selected channel. When units are on different channels, the receiver's LEDs will flash repeatedly until the correct channel is selected.
Rechargeable Battery: The internal 750 mAh Lithium Battery provides up to 6 hours of operating time, offering ample usage for practice sessions or performances.
On/Off Switch: A simple slide switch on each unit controls the power. It is recommended to turn off the power amplifier first, then set both the transmitter and receiver switches to the OFF position when not in use.

Maintenance Features:

Charging: The units are charged via a supplied duo-pin USB charging cable, which connects to a computer USB output. It is recommended to fully charge both units before their first use and to charge them at least once a month to maintain battery health.
Cleaning: The units should be cleaned only with a dry cloth.
Storage: Store the product in a clean and dry environment.
Safety Precautions:
- Avoid exposing the power pack to fire or excessive temperatures (above 100°C/212°F) to prevent explosion.
- Do not expose the product to bright sunshine for extended periods.
- Do not disassemble the apparatus; servicing should only be performed by qualified personnel. Incorrect reassembly poses a risk of fire or injury.
- Do not use the apparatus if it is damaged or modified, as damaged batteries may exhibit unpredictable behavior.
- Keep the product safely out of reach of children and pets due to choking and swallowing hazards from its small size and internal battery.
- Use only the power supply or charger recommended by the manufacturer to avoid fire or injury.
- Do not operate the apparatus in excess of its output rating to prevent fire or injury.
- To prevent possible hearing damage, avoid listening at high volume levels for long periods.
Disposal: The product must be disposed of separately from household waste, following the WEEE Directive (2012/19/EU) and national laws. It should be taken to a collection center licensed for recycling waste electrical and electronic equipment (EEE) to prevent negative environmental and health impacts.