Behringer B212A - 4 Installation; 5 Specifications

EUROLIVE B212A/B215A
Specications 7
Installation4.
Both audio inputs of the BEHRINGER B212A/B215A and the LINK
OUTPUT connector are fully balanced. To maximize interference
compensation, try to establish balanced connections to other
equipment, whenever possible.
¼" TRS connectorFig. 4.1:
XLR connectorsFig. 4.2:
Make sure that only competent people install your +
B212A/B215A. They must be sufciently earthed during
and after the installation process. Otherwise, electro-
static discharges may negatively affect the operating
characteristics of your equipment.
Specications5.
Output power
Low-frequency range
RMS @ 1% THD 200 W @ 8 Ω
Peak power 320 W @ 8 Ω
High-frequency range
RMS @ 1% THD 50 W @ 8 Ω
Peak power 80 W @ 8 Ω
Input
XLR connector (servo-balanced)
Sensitivity -40 dBu to +4 dBu
Input impedance 20 kΩ
¼" TRS jack (servo-balanced)
Sensitivity -40 dBu to +4 dBu
Input impedance 20 kΩ
Link output
XLR connector
Loudspeaker system data
B212A
Frequency range 65 Hz to 20 kHz
Crossover frequency 2.4 kHz (12 dB)
Maximum sound pressure level 125 dB @ 1 m
LIMITER optical
Dynamic Equalizer Processor-controlled
B215A
Frequency range 55 Hz to 20 kHz
Crossover frequency 1.9 kHz (12 dB)
Maximum sound pressure level 126 dB @ 1 m
LIMITER optical
Dynamic Equalizer Processor-controlled
Equalizer
HIGH 12 kHz / ±15 dB
LOW 80 Hz / ±15 dB
Power supply
Power consumption max. 400 W
Mains voltage / Fuse
100 - 120 V~ (50/60 Hz) T 5,0 A H 250 V
220 - 230 V~ (50/60 Hz) T 2,5 A H 250 V
Mains connector Standard IEC receptacle
Physical/weight
B212A
Dimensions (H x W x D) approx. 21.7" x 13.6" x 10.6" (approx.
550 mm x 345 mm x 270 mm)
Weight approx. 32.9 lbs (approx. 14.9 kg)
B215A
Dimensions (H x W x D) approx. 27.2" x 17.3" x 13.2" (approx.
690 mm x 440 mm x 335 mm)
Weight approx. 43 lbs (approx. 19.5 kg)
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modications may be made from time to time to existing
products without prior notice. Specications and appearance may differ from those
listed or illustrated.