Behringer DCX2496 - Stereo Operation with Two Subwoofers

26
ULTRADRIVE PRO DCX2496
6.5 Stereo operation plus 2 subwoofers
Fig. 6.5: Stereo operation plus 2 woofer cabinets
Only two frequency ranges (Low and High) are used on each stereo side. The two passive speaker cabinets for the higher frequencies
are limited towards the bass end and are fine-tuned in their sound with the DCXs internal equalizer. The stereo bass signal is first sent
to the active woofer, which also provides the passive woofer cabinet with sufficient power for the right-hand low-frequency channel. The
unused outputs 5 and 6 can be used as mono delay lines.
6. APPLICATIONS