Need help?Do you have a question about the Behringer DCX2496 and is the answer not in the manual?
General| Brand | Behringer |
|---|---|
| Model | DCX2496 |
| Category | Stereo System |
| Language | English |
Instructions for safe shipment inspection, initial operation, and warranty registration.
Guidance on how to use the manual for understanding the unit's functions and controls.
Explanation of input/output LEDs, display, and menu navigation buttons and data wheel.
Description of mains connector, fuse holder, RS-232, and RS-485 LINK connectors.
How to select output configurations for different frequency ranges and speaker setups.
Defining cutoff frequencies and filter types to separate audio signals for outputs.
Procedures for muting or unmuting individual or all input and output channels.
How to save current settings as presets and load previously stored configurations.
Explanation of the user interface, menu navigation, and parameter editing process.
Details on setting up input/output routing and stereo linking.
Setting the input gain level for analog inputs A, B, and C from -15 to +15 dB.
Adjusting delay times for input signals and assigning custom names to inputs.
Applying various EQ filter types and settings to input signals for tonal shaping.
Selecting input source, adjusting output gain, and assigning custom names to outputs.
Defining frequency bands, filter slopes, and types for precise signal separation.
Implementing a limiter on each output to prevent clipping and protect equipment.
Options for storing presets to the device's internal memory or an external PCMCIA card.
Removing unwanted presets or formatting external memory cards.
A common setup for 3-way stereo speaker systems, splitting signals into low, mid, and high frequencies.
Configuring the system for stereo bi-amplification with a dedicated mono subwoofer for bass frequencies.
A setup for three bi-amplified speaker cabinets, typically used for LCR sound systems in cinemas or stage monitors.
A stereo setup using two full-range cabinets and a mono subwoofer for enhanced bass response.
A stereo configuration utilizing two full-range cabinets and two subwoofers for expanded low-frequency coverage.
A bi-amplified stereo setup including a subwoofer and an additional stage monitor for performance monitoring.
Using the DCX2496 as a distributor for mono signals across multiple zones with individual EQ and delay settings.
Creating delayed stereo speaker signals for large venues or open-air concerts to compensate for distance-related echoes.
Configuring the system for a 3-channel surround sound experience, often used with media playback.
A complex stereo setup involving 4-way bridged amplification and multiple stage monitors for live performances.
An advanced mono setup using five frequency-optimized ways plus an additional independent mono signal for flexibility.
Implementing a full 5.1 surround sound system for immersive audio experiences, often with DVDs or multi-channel mixes.
To Next Page
