31
ULTRADRIVE PRO DCX2496
6.10 Stereo 4-Way bridged system plus 2 monitors
Fig. 6.10: 4-way mono-bridged operation plus 2 monitors (per stereo side)
This application uses one ULTRADRIVE PRO for each stereo side. When both units are coupled to each other via the LINK jacks,
and one of them is additionally connected to a notebook/PC, you can use the computer to remotely control both devices with our free
CrossOverRemote Software.
In this example, each DCX2496 is supplied with one side of the main stereo signal (In A). Two additional mono signals are routed
from the console to inputs B and C. Two power amps each are used for the 4-way paths of each P.A. stack, while the third power amp
drives two full-range stage monitors. This allows for building a stereo 4-way system that gives the musicians four on-stage monitors
that can be accessed individually.
6. APPLICATIONS
To Next Page
Loading...
