28
ULTRADRIVE PRO DCX2496
6.7 Mono 6-Zone distribution mode
Fig. 6.7: Mono 6-way Zoning (signal distribution mode)
In this special-purpose application, the ULTRADRIVE PRO is not used as a frequency crossover but rather as a signal distributor, for
dedicated EQing plus individual delays and separate volume settings for each output. The monophonic mix signal is split up and sent
to six equal outputs. It can be used for a variety of applications requiring the transmission of music or speech over large distances or to
several rooms or rooms consisting of several compartments. Examples are large discotheques, multi-room clubs/pubs/bars, shopping
malls, restaurants, hotels, lobbies, trade show and conference halls, railway stations, churches/cathedrals and even at home where
you can use the DXC2496 to play back music in every room.
6. APPLICATIONS
To Next Page
Loading...
