Need help?Do you have a question about the Behringer DR18SUB and is the answer not in the manual?
General| Phase shift | 0 - 180 ° |
|---|---|
| Subwoofer type | Active subwoofer |
| Subwoofer peak power | 2400 W |
| Subwoofer driver diameter | 460 mm |
| Subwoofer frequency range | 30 - 150000 Hz |
| Subwoofer crossover frequencies | 90 - 120 Hz |
| Subwoofer driver diameter (imperial) | 18 \ |
| On/off switch | Yes |
| Product color | Black |
| LED indicators | Power, Y |
| AC input voltage | 100 - 120 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 210 W |
Weight and Dimensions| Subwoofer depth | 609 mm |
|---|---|
| Subwoofer width | 530 mm |
| Subwoofer height | 650 mm |
| Subwoofer weight | 41000 g |
Covers electrical safety, handling, environmental exposure, and disposal guidelines for the equipment.
Details Music Tribe's limitations of liability and lists registered trademarks.
Information on applicable warranty terms and conditions available online.
Details on balanced XLR inputs and outputs for audio signal routing via cables.
Adjusting subwoofer volume, selecting crossover frequencies, and output signal routing modes.
Functionality for phase correction and controlling the subwoofer's power state.
Explanation of indicator LEDs for signal, limit, and power, plus AC power connection.
Steps for speaker placement, making necessary connections, and initial power-up.
Connecting audio sources, adjusting subwoofer level, and monitoring limiter status.
Using OUTPUTS MODE and PHASE switch for optimal sound balance and phase alignment.
Guide to registering your purchase online for efficient service and warranty claims.
Information on handling malfunctions and accessing online or local support channels.
Guidance on using correct mains voltage and proper fuse replacement procedures.
Details on FCC rules for digital devices, interference, and user modification cautions.
To Next Page