Do you have a question about the Behringer Eurolive VQ1500D and is the answer not in the manual?
Speaker type | 2-way |
---|---|
Woofer diameter | 381 mm |
Number of speakers | 1 |
Audio output channels | - channels |
Subwoofer included | Yes |
Impedance | - Ω |
Sensitivity | 122 dB |
Frequency range | 40 - 200 Hz |
RMS rated power | - W |
Connectivity technology | Wired |
Product color | Black |
Product design | Rectangle |
Recommended usage | Universal |
Power source type | AC |
Highlights the high-performance transducer, Class-D amplifier, and built-in stereo crossover for accurate bass reproduction.
Details controls like Level, High Cut, Bass Boost, Phase, and indicators for Power, Signal, and Clip.
Covers intelligent limiter for protection and internal switch-mode power supply for efficiency and audio quality.
Describes the pole socket, ergonomic handles, and rugged steel grill for ease of transport and durability.
Explains Class-D amplifier operation, reduced heat generation, and high-fidelity output with switch-mode power supplies.
Details the in-house design and manufacturing of voice coils, cones, and back plates for superior quality.
Describes balanced XLR inputs and outputs, and Thru jacks for connecting additional enclosures.
Explains controls for Boost Frequency, High Cut, Level, and Phase switch for sound tuning.
Details the Power, Signal, and Limit LEDs for monitoring system status and performance.
Compares 18" and 15" woofers, noting the 18" moves more air for larger crowds and higher impact.
Illustrates connecting one VQ1800D/VQ1500D subwoofer with stereo speakers via a mixer.
Shows a setup with a VQ1500D subwoofer stacked below a loudspeaker for increased sound projection.
Demonstrates connecting two VQ1500D subwoofers with stereo speakers for enhanced low-frequency coverage.
Lists maximum output power, input/output types, impedance, and sensitivity for the VQ1800D and VQ1500D.
Details frequency range, response, SPL, limiter type, and control functions for both subwoofer models.
Provides woofer size, impedance, and lists amplifier protection features like short circuit and thermal protection.
Specifies voltage requirements, power consumption, mains connection, and physical dimensions/weight.