Behringer EURODESK MX3282A - Product Features Overview

4
SPECIFICATIONS
Main channel strip
Mic input electronically balanced, discrete input configuration
Mic E.I.N. (22 Hz to 22 kHz) -129.0 dBu, 150 Ohms source
-117.3 dBqp, 150 Ohms source
-132.0 dBu, input shorted
-122.0 dBqp, input shorted
Distortion (THD & N) 0.007 % at +4 dBu, 1 kHz, bandwidth 80 kHz
Gain range +10 dB to +60 dB
Max. input +12 dBu
Line input electronically balanced
Gain range unity to +40 dB
Max. input +22 dBu
Channel fader range +10 dB to -85 dB / off
Aux send gain range off to unity to +15 dB
Equalisation
Hi shelving 12 kHz, +/- 15 dB, Q fixed at 2 oct.
Hi mid bell (ch. 25 to 32) 3 kHz, +/- 15 dB, Q fixed at 2 oct.
Mid sweep (ch. 1 to 24) 100 Hz to 8 kHz, +/- 15 dB, Q fixed at 2 oct.
Lo mid bell (ch. 25 to 32) 500 Hz, +/- 15 dB, Q fixed at 2 oct.
Lo shelving 80 Hz, +/- 15 dB, Q fixed at 2 oct.
Lo cut (HPF) 75 Hz, 18 dB/oct.
Channel insert
Max. in/out +22 dBu
Channel to channel crosstalk -95 dB @ 1 kHz
Subgroup section
Noise bus noise @ fader 0 dB:
-105.0 dBr (ref. +4 dBu)
-92.0 dBr (ref. +4 dBu, all input ch. assigned, unity gain, ch. muted)
-87.0 dBr (ref. +4 dBu, all input ch. assigned, unity gain)
Submaster output max. out +22 dBu balanced/unbalanced
Fader range +10 dB to -85 dB / off
Main mix section
Noise bus noise @ fader 0 dB:
-102.0 dBr (ref. +4 dBu)
-92.0 dBr (ref. +4 dBu, all input ch. assigned, unity gain, ch. muted)
-94.5 dBr (ref. +4 dBu, all input ch. assigned, unity gain)
Max. output +28 dBu balanced, +22 dBu unbalanced
Aux returns gain range off to unity to + 20 dB
Aux sends max. out +22 dBu
General
Distortion (THD & N) 0.007 %, @ +4 dBu, 1 kHz, bandwidth 80 kHz
Frequency response 20 Hz to 40 kHz, +/- 1 dB any input to any output
10 Hz to 120 kHz, +/- 3 dB
Power supply
External power supply 150 Watts, 19" (482.6 mm), 2 rack units, app. 7 kg
Dimensions/weight
Dimensions (H * W * D) app. 2.17/4.1" (55/105 mm) * 41.3" (1050 mm) * 20.9" (530 mm)
Weight app. 18 kg (without PSU)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.