behringer.com
The new BEHRINGER PMP Powered
Mixers (2 x 800-Watt stereo, 1600-Watt
bridged mode) produce even more power
than their predecessors while maintaining
a famously low weight and high e ciency.
These mixers employ Class-D technology
including a new switch-mode power
supply, signi cantly reducing weight and
heat. The 20-channel PMP6000 features
12 built-in XENYX preamps, the
16-channel PMP4000 features 8 built-in
XENYX mic preamps, and the 10-Channel
PMP1680S features 8 high-quality
built-in mic preamps. All three models
feature 24-bit FX processors, stereo
7-band graphic EQ and our renowned
FBQ Feedback Detection System.
What is Class-D Technology?
Instead of operating relatively
continuously like Class AB circuits,
Class-D amps switch on and o thousands
of times per second, delivering power
only when needed. In other words, the
ampli er is either fully on or fully o , which
signi cantly reduces power losses from the
output devices given o as heat. Less heat
means our amps don’t need massive heat
sinks, and that means we can make them
lighter. Our no-compromise design means
the new PMP mixers will deliver full power
with incredible delity all night long,
without the need for lengthy rest cycles.
When used in conjunction with
switching-mode power supplies, which
don’t require huge and heavy transformers,
our Class-D ampli ers provide tremendous
dynamic punch and superior delity.
The resulting speaker systems are much
lighter, making them easy to transport
and set up.
Continued on next page
1600-Watt 10/16/20-Channel Powered
Mixer with Multi-FX Processor and
FBQ Feedback Detection System
Ultra-compact 2 x 800-Watt stereo
powered mixers
(1600 Watt bridged mode)
Revolutionary Class-D ampli er
technology: enormous power,
incredible sonic performance and
super-light weight
Ultra-compact design at nearly
half the weight of conventional
powered mixers
PMP6000: 20-channel mixer
section features 12 mono and
4 stereo channels plus separate
CD/Tape input/output
PMP4000: 16-channel mixer
section features 8 mono
and 4 stereo channels plus
separate CD/Tape input/output
PMP1680S: 10-channel mixer
section features 6 mono and
2 stereo channels plus separate
CD/Tape input/output
PMP6000, PMP1680S: Dual
studio-grade 24-bit stereo FX
processors with 100 awesome
presets including reverb, chorus,
anger, delay, pitch shifter and
various multi-e ects
PMP4000: Studio-grade 24-bit
stereo FX processor with 100
awesome presets including reverb,
chorus, anger, delay, pitch shifter
and various multi-e ects
Revolutionary FBQ Feedback
Detection system instantly reveals
critical frequencies for easy
feedback removal
Powered Mixers
EUROPOWER
PMP6000/PMP4000
PMP1680S
To Next Page
Need help?
General
Weight and Dimensions
