Behringer Europower PMP960M - Technical Specifications: Speaker Output and DSP; Loudspeaker Impedance and Power Ratings; DSP Characteristics and Display Type; Technical Specifications: Power, Fuses, and Consumption

ENGLISH
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
13
LOUDSPEAKER OUTPUTS
Type Professional twist-lock style connector
Load impedance:
PMP960M
MAIN L/R -
PMP980S
MAIN L/R 4 - 8 Ohm
PMP1280S
MAIN L/R 4 - 8 Ohm
PMP960M
MONITOR/MAIN MONO 4 - 8 Ohm
MAIN MONO/MAIN MONO 4 - 8 Ohm
BRIDGE 8 - 16 Ohm
PMP980S
MONITOR/MAIN MONO 4 - 8 Ohm
MAIN MONO/MAIN MONO 4 - 8 Ohm
BRIDGE 8 - 16 Ohm
PMP1280S
MONITOR/MAIN MONO 4 - 8 Ohm
MAIN MONO/MAIN MONO 4 - 8 Ohm
BRIDGE 8 - 16 Ohm
DSP
Converter 24-bit Delta-Sigma, 64/128-times
oversampling
Dynamics D/A 90 dB
Sampling rate 40 kHz
Delay Time max. 5 secs
Signal run time
(Line In > Line Out) approx. 1.5 ms
DISPLAY
PMP960M
Type 2-digit, 7-segment LED
PMP980S/PMP1280S
Type 2 x 2-digit, 7-segment LED
OUTPUT POWER
RMS @ 1% THD (sine wave), both channels driven:
PMP960M
8 Ohm per channel 165 W
PMP980S
8 Ohm per channel 165 W
PMP1280S
8 Ohm per channel 215 W
PMP960M
4 Ohm per channel 250 W
PMP980S
4 Ohm per channel 250 W
PMP1280S
4 Ohm per channel 450 W
RMS @ 1% THD (sine wave), bridged mode:
PMP960M
8 Ohm 500 W
PMP980S
8 Ohm 500 W
PMP1280S
8 Ohm 900 W
Peak Power, both channels driven:
PMP960M
8 Ohm per channel 225 W
PMP980S
8 Ohm per channel 225 W
PMP1280S
8 Ohm per channel 300 W
PMP960M
4 Ohm per channel 350 W
PMP980S
4 Ohm per channel 350 W
PMP1280S
4 Ohm per channel 600 W
Peak Power, bridged mode:
PMP960M
8 Ohm 900 W
PMP980S
8 Ohm 900 W
PMP1280S
8 Ohm 1200 W
FUSES
PMP1280S
100 - 120 V~, 50/60 Hz T 10 A H 250 V
220 - 240 V~, 50/60 Hz T 6.3 A H 250 V
POWER CONSUMPTION
Power consumption 1000 W
Mains connector IEC standard receptacle