Behringer EURORACK PRO RX1202FX - Specifications; Mono & Stereo Inputs; Insert & Auxiliary Inputs; Outputs

13 EURORACK PRO RX1202FX User Manual
5. Specications
Mono Inputs
MIC (IMP Invisible Mic Preamp)
Type XLR, electr. balanced
Mic E.I.N. (20 Hz – 20 kHz)
@ 0 Ω source resistance -132 dB / -134 dB A-weighted
@ 50 Ω source resistance -130 dB / -132 dB A-weighted
@ 150 Ω source resistance -128 dB / -130 dB A-weighted
Frequency response <10 Hz – 200 kHz
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio -110 dB / -112 dB A-weighted
Distortion (THD+N) 0.003%, A-weighted
Line In
Type ¼" TRS connector,
electronically balanced
Impedance approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB gain
Stereo Inputs
Type ¼" TRS connector,
electronically balanced
Impedance approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Max. input level +22 dBu
Insert
Type ¼" TRS connector
(Tip=Send, Ring=Return)
Auxiliary Inputs
CD/TAPE IN
Type RCA connectors, unbalanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
Aux Return
Type ¼" TRS connector, balanced
Impedance approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Max. input level +22 dBu
Outputs
AUX SENDS (FX)
Type ¼" TRS connector, impedance balanced
Impedance approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +22 dBu
Aux Sends (MON)
Type ¼" TRS connector, impedance balanced
Impedance approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +22 dBu
Main Out
Type XLR connectors, balanced
Impedance approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +28 dBu balanced
+22 dBu unbalanced
Ctrl Out
Type ¼" TRS connector, impedance balanced
Impedance approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +22 dBu
CD/Tape Out
Type RCA connectors, unbalanced
Impedance approx. 1 kΩ
Max. output level +22 dBu
Phones
Type ¼" TRS connector
Max. output level +19 dBu / 150 Ω (316 mW)
EQ
Low 100 Hz / ±15 dB
High 12 kHz / ±15 dB