Behringer EURORACK PRO RX1202FX - Specifications Table

20 EURORACK PRO RX1202FX
Specications
Mono Inputs
MIC (IMP Invisible Mic Preamp)
Type XLR, electr. balanced
Mic E.I.N. (20 Hz – 20 kHz)
@ 0 Ω source resistance -132 dB / -134 dB A-weighted
@ 50 Ω source resistance -130 dB / -132 dB A-weighted
@ 150 Ω source resistance -128 dB / -130 dB A-weighted
Frequency response <10 Hz – 200 kHz
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio -110 dB / -112 dB A-weighted
Distortion (THD+N) 0.003%, A-weighted
Line In
Type ¼" TRS connector, electronically balanced
Impedance
approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB gain
Stereo Inputs
Type ¼" TRS connector, electronically balanced
Impedance
approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Max. input level +22 dBu
Insert
Type
¼" TRS connector
(Tip=Send, Ring=Return)
Auxiliary Inputs
CD/TAPE IN
Type RCA connectors, unbalanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
Aux Return
Type ¼" TRS connector, balanced
Impedance
approx. 20 kΩ balanced
approx. 10 kΩ unbalanced
Max. input level +22 dBu
Outputs
AUX SENDS (FX)
Type ¼" TRS connector, impedance balanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +22 dBu
Aux Sends (MON)
Type ¼" TRS connector, impedance balanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +22 dBu
Main Out
Type XLR connectors, balanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +28 dBu balanced / +22 dBu unbalanced
Ctrl Out
Type ¼" TRS connector, impedance balanced
Impedance
approx. 240 Ω balanced
approx. 120 Ω unbalanced
Max. output level +22 dBu
CD/Tape Out
Type RCA connectors, unbalanced
Impedance approx. 1 kΩ
Max. output level +22 dBu
Phones
Type ¼" TRS connector
Max. output level +19 dBu / 150 Ω (316 mW)
EQ
Low 100 Hz / ±15 dB
High 12 kHz / ±15 dB
Main Mix System Data
Noise
Main mix @ -∞, Channel fader -∞ -98 dB / -101 dB A-weighted
Main mix @ 0 dB, Channel fader -∞ -85 dB / -88 dB A-weighted
Main mix @ 0 dB,
Channel fader @ 0 dB
-77 dB / -80 dB A-weighted
Fade Attenuation (Crosstalk Attenuation)
Main fader closed 90 dB
Channel fader closed 90 dB
Frequency Response
Microphone Input to Main Out
<20 Hz – 105 kHz +1 dB / -1 dB
<10 Hz – 170 kHz +3 dB / -3 dB
Eects Section
Converter 24-bit Sigma-Delta
Frequency rate 40 kHz
Presets 100
Power Supply
Power consumption 18 W
Voltage 100 – 240 V~, 50/60 Hz
Fuse 100 – 240 V~: T 1.6 A H 250 V
Mains connection IEC (power) cable
Dimensions/Weight
Dimensions (H x W x D)
approx. 5 ⁄ x 19 x 5 ⁄"
approx. 133 x 482 x 150 mm
Weight (net) approx. 6.6 lbs / 3 kg