26 EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO Quick Start Guide 27
Specications
UB2442FX-PRO UB2222FX-PRO UB1832FX-PRO UB1622FX-PRO
Microphone Inputs (IMP Invisible Mic Preamp)
Type XLR, electronically balanced, discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response <10 Hz - 150 kHz (-1 dB), <10 Hz - 200 kHz (-3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB Gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted (0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A-weighted
Line Input
Type ¼" TRS connector electronically balanced
Impedance approx. 20 kΩ balanced, 10 kΩ unbalanced
Gain range -10 to +40 dB
Max. input level 30 dBu
Fade-Out Attenuation (Crosstalk Attenuation)
Main fader closed 90 dB
Channel muted 89 dB
Channel fader closed 89 dB
Frequency Response
Microphone Input to Main Out
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo Inputs
Type ¼" TRS connector electronically balanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
EQ Mono Channels
Low 80 Hz / ±15 dB
Mid 100 Hz - 8 kHz / ±15 dB
High 12 kHz / ±15 dB
EQ Stereo Channels
Low 80 Hz / ±15 dB
Low Mid 500 kHz / ±15 dB
High Mid 3 kHz / ±15 dB
High 12 kHz / ±15 dB
Aux Sends
Type ¼" TS connector unbalanced
Impedance approx. 120 kΩ
Max. output level +22 dBu
Stereo Aux Returns
Type ¼" TRS connector electronically balanced
Impedance approx. 20 kΩ bal. / 10 kΩ unbal.
Max. input level +22 dBu
UB2442FX-PRO UB2222FX-PRO UB1832FX-PRO UB1622FX-PRO
Main Outputs
Type
XLR, electronically balanced
and ¼" TRS balanced
XLR, electronically balanced
and ¼" TRS balanced
XLR, electronically balanced
and ¼" TRS balanced
¼" TS connector unbalanced
Impedance approx. 240 Ω symm. / 120 Ω unbalanced
Max. output level +28 dBu +28 dBu +28 dBu +22 dBu
Control Room Outputs
Type ¼" TS connector unbalanced
Impedance approx. 120 kΩ
Max. input level +22 dBu
Headphones Outputs
Type ¼" TRS connector unbalanced
Max. ouput level +19 dBu / 150 Ω (+25 dBm)
DSP 24-bit
Converter 24-bit Sigma-Delta, 64/128-times oversampling
Sampling rate 40 kHz
Frequency Response
Microphone Input to Main Out
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Main Mix System Data
2
Noise
Main mix @ -∞,
Channel fader @ -∞
-100 dB -101 dB -101 dB -101 dB
Main mix @ -0 dB,
Channel fader @ -∞
-87 dB -93 dB -93 dB -96 dB
Main mix @ 0 dB,
Channel fader @ 0 dB
-80 dB -93 dB -93 dB -83 dB
Power Supply
Mains voltage 100 to 240 V~, 50/60 Hz
Power consumption 47 W 46 W 43 W 37 W
Fuse 100 - 240 V ~: T 1.6 A H 250 V
Mains connection Standard IEC receptacle
Physical/Weight (Net)
Dimensions (H x W x D)
approx. 5.3 x 17.3 x 16.5"
approx. 135 x 440 x 420 mm
approx. 3.5 x 16.9 x 14"
approx. 90 x 430 x 355 mm
approx. 3.5 x 16.9 x 14"
approx. 90 x 430 x 355 mm
approx. 3.8 x 11.9 x 13.8"
approx. 97 x 301 x 351 mm
Weight (Net) approx. 14.5 lbs / 6.6 kg approx. 12.1 lbs / 5.5 kg approx. 11.7 lbs / 5.3 kg approx. 9.5 lbs / 4.3 kg
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or liiustrated.
To Next Page
Loading...
