Behringer FEEDBACK DESTROYER FBQ1000 - Thank you

Page 2 of 4
Front Panel
Rear Panel
LED METER displays
output signal level,
in Total Bypass
mode, displays
input signal level
STATUS LEDs
display status
of 12 individual
lters for each
channel
DISPLAY shows
preset number
and parameter
values
JOG WHEEL
scrolls
through presets
and adjusts
parameter values
FILTER SELECT
button enables
JOG WHEEL to
select one of 12
lters per channel
for editing
ENGINE L and R
buttons select
left and right
audio channels
FREQUENCY
button enables
JOG WHEEL to select
frequency edited in
Parametric EQ mode
BANDWIDTH
button enables JOG
WHEEL to adjust
lter bandwidth
(Q factor) of selected
IN/OUT button
activates/
deactivates
Parametric
EQ lters
STORE button
enables JOG
WHEEL to
scroll through
10 available
preset slots
GAIN button
enables JOG
WHEEL to adjust
amount of boost/
attenuation of
selected lter
(+16 dB to -48 dB)
FINE button
enables JOG WHEEL
to ne-tune
standard ISO
frequencies
FILTER MODE
button accesses
four lter
modes: O (OF),
Parametric EQ (PA),
Single-Shot (SI),
and Auto (AU)
IEC
power
socket
MIDI OUT THRU/
IN connectors
OPERATING
LEVEL button
switches
between -10 dBV
and +4 dBu
INPUT/OUTPUT jacks
accept balanced or
unbalanced XLR and
¼" connections
FEEDBACK
DESTROYER
FBQ1000