behringer.commusictribe.com
© Music Tribe Global Brands Ltd. All rights reserved.
All information in this document is subject to change without any further notice.
FLOW 8 Firmware Update
V11739 - (15 February 2021)
Welcome
Congratulations on purchasing the innovative FLOW 8 compact mixer. This major rmware update
introduces new USB modes and routing options. It adds parametric EQ control and a snapshot scope to
load parameters selectively.
Behringer is constantly adding new features and making enhancements, so that you always experience
the best possible performance. To make use of the latest features and improvements, we recommend
installing the latest rmware, driver and app versions, always. The rmware update 11739 for FLOW 8
works with remote app FLOW MIX 1.2 and Windows ASIO/WDM driver version 5.0.
Firmware 11739 is introducing a new memory structure.
* Snapshots stored on the hardware will be deleted!
* Snapshots previously stored in the App’s SNAPSHOT LIBRARY can still be used.
This new FLOW Firmware version contains:
• New USB mode
1. Streaming/Recording (switches between 2x4 and 10x4 USB cong)
2. Up to 4 channel USB playback (USB OUT 1/2, USB OUT 3/4)
• New routing options
1. USB 1/2 can be routed to CH 5/6
2. USB 3/4 can be routed to CH 7/8
3. USB 1/2 or USB 3/4 can be directly routed to MONITOR SEND 1/2 TRS output
• Option to stereo link MON1/2
• Option to change headphone output
1. MAIN-Mix, pre- or postfader
2. MON1/2-Mix, pre- or postfader
• Option to send FX to MAIN and/or MON buses
• Snapshot scope for selectively loading channel settings, eects, routing, MAIN- and MON-Mixes
• Fully parametric control of GAIN, FREQ and WIDTH in 4-band and 9-band EQs
• Option to transfer the current mixer state via MIDI Sysex
• Optional -10dbV output level for MAIN and MON outputs, e.g. when used with DSLR cameras
• Output delays 0…340 ms for time alignment in live sound or video production
To Next Page
Need help?
General
