behringer.commusictribe.com
© Music Tribe Global Brands Ltd. All rights reserved.
All information in this document is subject to change without any further notice.
Update Process:
To update FLOW 8 to the latest rmware please use the SimplyPUT update tool. SimplyPUT is available
for Mac, Windows and Linux and can be downloaded from the FLOW 8 product page at behringer.com.
WINDOWS:
1. Please make sure you have installed the latest USB-Driver, which is available on the FLOW 8
product page!
2. Connect FLOW 8 to your computer using the USB Type B socket
3. Make sure your computer is connected to the internet
4. Launch Application
SimplyPUT will detect FLOW 8 and search for the latest rmware available on the server
SimplyPUT will always preselect the latest version available
5. Select UPDATE
SimplyPUT will start transferring the new rmware to the hardware using the installed USB-Driver
After a successful update, FLOW 8 will indicate the new Firmware-Version and reboot automatically
MAC:
1. Connect FLOW 8 to your computer using the USB Type B socket
2. Make sure your computer is connected to the internet
3. To launch application please use rightclick (CTRL+Click) and select Open.
Select Open on the upcoming pop up again
SimplyPUT will detect FLOW 8 and search for the latest rmware available on the server
SimplyPUT will always preselect the latest version available
4. Select OPEN
This will enable the DFU-Mode on the hardware.
Recognisable by a red display on the hardware showing the current installed Firmware-Version.
5. Select UPDATE
Simply Put will start ashing the new rmeware to the hardware
After a successful update FLOW 8 will indicate the new Firmware-Version and reboot automatically
To Previous Page
Loading...
Need help?
General
