EasyManuals Logo

Behringer MicroPHONO PP400 User Manual

Behringer MicroPHONO PP400
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
MICROPHONO PP400
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Important Safety
Instructions

Other manuals for Behringer MicroPHONO PP400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Behringer MicroPHONO PP400 and is the answer not in the manual?

Behringer MicroPHONO PP400 Specifications

Input Specifications IconInput Specifications
input impedance47 kW
maximum input level-23.5 dBV @ 1kHz
Output Specifications IconOutput Specifications
output impedance50 W
maximum output level+11.5 dBV @ 1 kHz
System Specifications IconSystem Specifications
frequency responseRIAA
THD0.06% typ. @ -40 dBu/1 kHz
gain35 dB
signal-to-noise ratio68 dBu @ 0 dBu, A-weighted
input sensitivity5.3 mV @ 1 kHz
Power Supply IconPower Supply
mains connectionexternal power supply, 12 V? / 150 mA
power consumption1.5 W
Dimensions and Weight IconDimensions and Weight
dimensions (H x D x W)32 x 103 x 64 mm
weight0.180 kg

Related product manuals