Behringer MIX-SEQUENCER MODULE 1050 - Specifications

51Quick Start Guide50 MIX-SEQUENCER MODULE 1050
Specications
Inputs
Inputs 1 – 8
Type
8 x 3.5 mm TS jacks,
DC coupled
Impedance 50 kΩ, unbalanced
Max input level +20 dBu
External advance input
Type
1 x 3.5 mm TS jack,
AC coupled
Impedance 10 kΩ, unbalanced
Max input level +10 V
External gate link input
Type
1 x 12-way 0.1"
box header, DC coupled
Impedance 10 kΩ, unbalanced
Max input level +5 V
Outputs
Out A / B
Type
2 x 3.5 mm TS jacks,
DC coupled
Impedance 1 kΩ, unbalanced
Max output level +20 dBu
Controls
Channel level knobs 8 x rotary knobs
Channel on / o buttons 8 x buttons, LED backlit
Exclusive-on buttons 8 x momentary switches
Level A / B 2 x rotary knobs
External gate
1 x 2-position switch Enable /
disable, switchable
Pulse gen / Manual advance
1 x 3-position switch
Pulse generator on / o /
manual advance, switchable
Counter / mixer
1 x 3-position switch
Left position, 4/2 counter with
4/2 mixer
Center position, 4/2 counter with
8/1 mixer
Right position, 8/1 counter with
8/1 mixer"
Pulse rate
1 x rotary knob,
0.5 Hz to 150 Hz
Counter
1 x 9-way rotary switch
O / 2 / 3 / 4 / 5 / 6 /
7 / 8, selectable"