Behringer 110 User Manual

Skip to content
Manuals+
User Manuals Simplified.
Behringer 110 VCO/VCF/VCA Synthesizer User Manual
Home » Behringer » Behringer 110 VCO/VCF/VCA Synthesizer User Manual
Behringer 110 VCO/VCF/VCA Synthesizer User Manual
Quick Start Guide
110 VCO/VCF/VCA
Legendary Analog VCO/VCF/VCA Module for Eurorack
Contents [ hide
1 Controls
2 Power Connection
3 Installation
4 Specifications
5 LEGAL DISCLAIMER
6 LIMITED
WARRANTY
7 File Downloads
8 References
9 Related Manuals
Controls

Behringer 110 Specifications

General

Brand	Behringer
Model	110
Category	Control Unit
Language	English

Summary

Front Panel Controls Overview

VCO and VCF Controls

Details on VCO waveform selection, pitch tuning, cutoff frequency, and resonance settings.

VCA and Modulation Controls

Covers VCA gain, pulse width modulation, and manual modulation level adjustments.

Signal Input and Output Jacks

Description of input jacks for signals and modulation, and output jacks for VCO and VCA.

Power and Installation

Power Connection Guide

Step-by-step instructions for connecting the module to a Eurorack power supply system.

Module Installation

Guidance on mounting the module into a Eurorack case using provided screws.

Technical Specifications

Input Specifications

Details on impedance, signal type, and levels for various module inputs.

Output and Control Parameters

Specifications for outputs, control ranges, and physical characteristics of the module.

Legal and Support Information

Legal Disclaimer and Warranty

Information on liability, trademark usage, and warranty terms and conditions.

File Downloads and Resources

Links for downloading the user manual and accessing community support.