Behringer MOTOR 61 - 10.3 Saving your first Preset

30 MOTÖR 61 / MOTÖR 49 User Manual
10.3 Saving your rst Preset
When the keyboard is new and straight out of the box, it will have just the
DEFAULT preset 0 loaded into memory. This preset cannot be erased, renamed, or
renumbered, so you will always have something to fall back on.
If you have used the keyboard for awhile and made some adjustments,
for example, you might have changed the color of the drum pad LEDs, or adjusted
some of the fader positions, then the current settings of the MOTÖR are now the
DEFAULT preset plus your changes.
To save these settings as a new preset:
1. Press the EDIT button, and rotate the DATA knob to highlight item 1.
PRESETS. Press the DATA knob to bring up the PRESET menu.
2. Rotate the DATA knob to highlight item 1. SAVE/COPY PRESET, and press the
DATA knob to bring up the next menu.
3. In the example below, no presets have been made before, and so only the
DEFAULT preset 0 is shown. Press the DATA knob to select Preset 0 as
the SOURCE.
4. Rotate the DATA knob and choose the number for your new preset as the
DESTINATION, then press the DATA knob to select. In this example, we have
chosen the new preset to be 11.
5. Rotate the DATA knob to choose YES or NO, then press the DATA knob to
select. (If the destination already had a preset, then the message below
would read “OVERWRITE?” instead of “COPY PRESET?”)
6. Success!
7. The new preset has been saved as PRESET 11, with the name DEFAULT.
This preset is in eect a copy of the DEFAULT preset with the extra changes
you have made. Now you can use the RENAME menu to change its name,
as shown below in section 10.5.