31 MOTÖR 61 / MOTÖR 49 User Manual
10.4 Updating an existing Preset
If you load a preset and make changes to some of the parameters, you can update
this preset and overwrite it. For example, suppose we have loaded preset 9, and
then made some changes to the MOTÖR parameters and want to update it:
1. Return to the main preset EDIT>PRESET>MENU by either pressing the BACK
button a few times, or press the EDIT button and select the PRESET menu.
2. Rotate the DATA knob to highlight item 1. SAVE/COPY PRESET, and press the
DATA knob to bring up the next menu.
3. Rotate the DATA knob and choose the number of your currently loaded
preset as the SOURCE PRESET (in our case 9). Press the DATA knob to select.
4. Rotate the DATA knob and choose this same preset number to be the
DESTINATION NUMBER. Press the DATA knob to select.
5. Rotate the DATA knob to choose YES or NO, then press the DATA knob
to select.
6. Success!
7. Now this preset 9 is updated with your new adjustments, overwriting the
original with the same name.
◊ If you liked the original preset 9 and wanted to keep it, you could have
chosen a different destination in step 4, instead of overwriting the
original. (Then, after step 6, you would also need to rename the new
preset to be different from your original.)
To Next Page
Loading...
