18. Do not install in a confined space, such as a book case or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point. Use this apparatus in tropical and/or moderate
climates.
LEGAL DISCLAIMER
MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained
herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS,
KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and DDA are trademarks or registered
trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2017 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at music-
group.com/warranty
MPA40BT-PRO/MPA40BT
Step 1: Hook-Up
Singer-songwriter hookup with a smartphone streaming audio over Bluetooth.
Smartphone streaming audio over Bluetooth with BEHRINGER wireless microphones.
Controls
1. INST/MIC IN combo jacks accept input signals over XLR balanced,¼” TRS balanced, or¼” TS unbalanced connectors. Connecting the wireless microphone system disables
the MIC 1 and MIC 2 combination jacks.
2. MIC 1/ MIC 2 LEVEL knobs control the gain for either the INST/MIC IN input jacks or wireless microphones 1 and 2.
3. RCA inputs accept line level inputs from auxiliary sources. The auxiliary signal will be merged with the Bluetooth signal.
4. BT/AUX LEVEL knob controls the gain for Bluetooth and the auxiliary signal from the RCA inputs.
5. WIRELESS SYSTEM USB input accepts the optional BEHRINGER wireless microphone receiver.
6. LEDs indicate wireless microphone signal input. Connecting the wireless microphone system disables the MIC 1 and MIC 2 combination jacks.
7. BATTERY LEVEL LEDs monitor the overall amount of remaining battery life when the unit is unplugged from an outlet.
8. POWER SOURCE jack accepts the included IEC cable.
9. POWER switch turns the unit off and on.
10. BASS knob adjusts low frequencies in the overall sound.
11. TREBLE knob adjusts high frequencies in the overall sound.
12. MAIN LEVEL knob controls the overall volume.
To Next Page
Loading...
