13. WOOFER reproduces low frequencies.
14. TWEETER reproduces high frequencies.
15. LUGGAGE TROLLEY (MPA40BT-PRO only) extends and retracts for easy transport and storage.
16. BATTERY COMPARTMENT contains the rechargeable battery. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
17. INPUT PANEL manages levels and routing for microphone, instrument, and Bluetooth signals.
18. WHEELS (MPA40BT-PRO only) allow convenient rolling transport.
NOTE: The connection range between speaker and Bluetooth streaming device may decrease if Bluetooth streaming and wireless microphones are used simultaneously.
Getting started
1. Set up the MPA40BT-PRO/MPA40BT in your chosen listening location.
2. Connect the MPA40BT-PRO/MPA40BT to a power outlet by using the included IEC power cable.
3. Turn all LEVEL knobs and the MAIN LEVEL knob down to the full counter-clockwise setting.
4. Connect all analog microphone, instrument, and/or RCA cables to their respective input jacks.
5. Power up the MPA40BT-PRO/MPA40BT by pressing the POWER switch to the “on” position.
6. If you are using BEHRINGER wireless microphones, plug the wireless dongle into the WIRELESS SYSTEM USB input. The WIRELESS SYSTEM LEDs will light up when
the wireless microphones become active.
To Next Page
Loading...
