7. To pair a Bluetooth device with the MPA40BT-PRO/MPA40BT, follow these steps:
• Press and hold the BT/AUX PAIRING BUTTON until the LED flashes quickly.
• Press and hold the BT/AUX PAIRING BUTTON until
the LED flashes quickly.
• Open Bluetooth in your mobile phone, MP3 player or other Bluetooth equipment to pair and connect.
• In your Bluetooth device, enter the PIN code: 0000 (Bluetooth version 2.0andabove will not require a PIN code).
• When the LED lights solid, you can begin playing music from your Bluetooth device.
8. While playing music from your Bluetooth device, turn the BT/AUX LEVEL knob to about the 50% position.
9. Slowly rotate the MAIN LEVEL knob clockwise until you achieve a comfortable listening level.
10. While speaking into each microphone, slowly rotate the MIC 1 and/or MIC 2 LEVEL knobs clockwise until you find a clean, clear sound. If a microphone signal sounds
distorted, rotate the LEVEL knob slowly counterclockwise until the sound cleans up.
To Next Page
Loading...
