Need help?Do you have a question about the Behringer PMH660M/PMH880S and is the answer not in the manual?
General| Type | Powered Mixer |
|---|---|
| EQ per Channel | 3-band |
| Channels | 6 (PMH660M), 8 (PMH880S) |
| Power Output | 2 x 300W (PMH660M), 2 x 400W (PMH880S) |
| Microphone Inputs | 4 (PMH660M), 6 (PMH880S) |
| Line Inputs | 2 (PMH660M), 2 (PMH880S) |
| Phantom Power | Yes |
| Effects | Digital effects processor |
| Aux Sends | 1 |
| Outputs | Main Out, Monitor Out |
| Power Supply | Internal power supply |
Warnings on electric shock, moisture, ventilation, and proper usage.
Comprehensive list of specific safety instructions for operation and maintenance.
Instructions for initial setup, shipment inspection, and operation.
Explains the manual's structure and where to find more information.
Explains controls for mono and stereo input channels, including EQ and panning.
Details controls for input gain, sensitivity, and different input types.
Describes the multi-effects processor, presets, and effect activation.
Covers controls for main and monitor outputs, EQ, feedback detection, and effects return.
Details various connectors like footswitch, FX OUT, AUX IN, and REC OUT.
Explains controls and connections on the rear panel, including phantom power and power amp modes.
Describes various reverb simulations like Cathedral, Plate, Concert, Stage, Room, Studio, Hall, Ambience, Reflections, and Spring.
Details modulation effects such as Chorus, Detune, Flanger, Phaser, and Rotary Speaker.
Explains delay effects including standard Delay, Echo, and Multi Tap.
Describes algorithms combining multiple effects like Chorus & Reverb, Flanger & Reverb, Phaser & Reverb.
Covers special effects like 3 Voice Pitch, LFO Bandpass, Vocal Distortion, and Vinylizer.
Instructions for connecting the power cord and ensuring proper grounding.
Details on using unbalanced TS, balanced TRS, XLR, and RCA connectors for audio input/output.
Information on connecting loudspeakers using SPEAKON connectors and impedance requirements.
Example for stereo operation using PA speakers and stage monitors.
Example for dual mono operation with main and monitor signals to separate loudspeakers.
Example of connecting various audio sources and recorders.
Example of using the mixer in bridged mono mode with a subwoofer and PA system.
Technical details for microphone, line, stereo, and preamp inputs/outputs.
Noise and level specifications for the main mix system.
Specifications for loudspeaker outputs including impedance and connector type.
Details on output power, voltage, consumption, fuse, and mains connector.
Physical dimensions and weight of the unit.
Instructions for registering for extended warranty via card or online.
Details on warranty coverage, exclusions, and repair process.
Procedure for obtaining a return authorization number for service.
Conditions and exclusions applicable to warranty claims.
Information on whether the warranty is transferable to subsequent owners.
Limitation of liability for damages related to warranty service.
Explanation of statutory rights and national law compliance.
To Next Page