2
POWERLIGHT PL2000
DEUTSCH
WELCOME TO BEHRINGER!
Thank you for the confidence you have shown in us by purchasing the
POWERLIGHT PL2000. It is an extremely dependable, premium-featured rack light in
the 19" format. The POWERLIGHT offers you many mains connectors and the
highest possible safety for maximum flexibility on the stage or at the studio.
CONTROL ELEMENTS
Front-side control elements
Use the POWER switch to power up the POWERLIGHT PL2000. The POWER
switch should always be in its Off position whenever you connect the unit
to the mains.
+ Merely pressing the POWER switch does not disconnect the unit
fully from the mains. To fully disconnect the unit from the mains,
unplug the power cord from the power outlet. During the installation,
make sure that both the power cord and the power outlet function
properly. When not using the unit for prolonged periods of time,
please unplug the units power cord from the power outlet.
+ Please make sure that the unit is grounded at all times. For your
own protection, you should never tamper with the grounding of the
cable or the unit itself. The unit must be connected to the mains
with an intact ground wire at all times.
The LIGHT switch activates the rack lighting. The light can also be turned on
independent of the POWER switch.
The rack light can be rotated and can be individually adjusted to best suit your
lighting needs.
Control elements in the back
There are 8 mains connectors in the back of the PL2000 for providing power
to additional equipment in your rack. The total power load of the equipment
connected to the PL2000 may not exceed 8 A.
CONTROL ELEMENTS