Behringer POWERPLAY P16-M - POWERPLAY 16 P16 System Details; P16-MB - Mounting Bracket; P16-D - 16-Channel Digital ULTRANET Distributor; Common System Features

POWERPLAY 16 (P16-M) - SETUP
1. Make sure the ON/OFF button is set to the “OFF” position.
2. Turn the OUTPUT LEVEL knob all the way down to the full counter-clockwise position.
3. Make sure the P16-M is connected to the p16-I via a CAT-5 cable at the ULTRANET IN port.
4. Plug your headphones into the PHONES jack using a TRS plug.
5. Power on the P16-M by pressing the ON/OFF button to the “ON” position.