Behringer U-CONTROL UCA202 User Manual

9 U-CONTROL UCA202 User Manual
behringer.com
Please dispose of all packaging materials in an ◊
environmentally friendly fashion.
Initial operation1.1.2
Please make sure the unit is provided with sufficient
ventilation, and never place the UCA202 on top of an
amplifier or in the vicinity of a heater to avoid the risk
of overheating.
The current supply is made via the USB connecting cable,
so that there is no external power supply unit required.
All required safety precautions have been adhered to.
Online registration1.1.3
Please do remember to register your new BEHRINGER
equipment right after your purchase by visiting
behringer.com (alternatively behringer.de) and kindly read
the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is
to have it repaired as quickly as possible. To arrange for
warranty service, please contact the retailer from whom
the equipment was purchased. Should your BEHRINGER
dealer not be located in your vicinity, you may directly
contact one of our subsidiaries. Corresponding contact
information is included in the original equipment packaging
(Global Contact Information/European Contact Information).
Should your country not be listed, please contact the
distributor nearest you. A list of distributors can be found in
the support area of our website (behringer.com/support).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!

Behringer U-CONTROL UCA202 Specifications

General

Power source	USB
Audio input	2
Form factor	Desktop
LED indicators	Yes
USB ports quantity	1
Built-in microphone preamp	-
Audio A/D Converter (ADC)	16-bit/48kHz

Weight and Dimensions

Depth	88 mm
Width	60 mm
Height	22 mm
Weight	100 g