DEUTSCH
13
U-CONTROL UCA202
3. OPERATING ELEMENTS AND CONNECTIONS
The VOLUME control adjusts the volume level of the headphones output. Turn the control fully to
the left before you connect the headphones. This helps you avoid the damage that is caused by
high volume settings.
3.2 Rear panel
75 6
Fig. 3.2: back of the UCA202
Use the LINE-OUT jacks for audio cables with RCA connectors.
Use the LINE-IN jacks for audio cables with RCA connectors.
The OFF/ON-MONITOR switch activates the monitor function. In this case the input signal is
routed directly to the headphones output.
To Next Page
Loading...
