Behringer U-CONTROL UCA202 User Manual

8
U-CONTROL UCA202
1. INTRODUCTION
Welcome to the family of U-CONTROL users and thank you for expressing your confidence in BEHRIN-
GER products by purchasing the UCA202. With the UCA202 you have purchased a high-performance
audio interface that includes a USB connector. It is thus an ideal sound card for your laptop computer or
an essential recording/playback component for studio environments that involve desktop computers.
The UCA202 is PC and Mac-compatible. Therefore, no separate installation procedure is required, while
the operating system drivers ensure an extremely short latency. Thanks to its robust construction and
compact dimensions, the UCA202 is also ideal for traveling. The separate headphones output allows you
to play back your recordings at any time, even if you don’t happen to have any loudspeakers available.
2 inputs and outputs as well as the digital stereo output give you total connecting flexibility to mixing
consoles, loudspeakers or headphones. Power is supplied to the unit via the USB interface. The LED
gives you a quick check that the UCA202 is properly connected to the computer. The UCA202 is the ideal
extra for every computer musician.
1. INTRODUCTION

Behringer U-CONTROL UCA202 Specifications

General

Power source	USB
Audio input	2
Form factor	Desktop
LED indicators	Yes
USB ports quantity	1
Built-in microphone preamp	-
Audio A/D Converter (ADC)	16-bit/48kHz

Weight and Dimensions

Depth	88 mm
Width	60 mm
Height	22 mm
Weight	100 g