To Next Page

To Previous Page

U-CONTROL UMA25S

1.3.1 Stand-alone mode

In case the USB connection is not available or detected, the

UMA25S automatically switches to the stand-alone mode. In this

mode, you can use the UMA25S to control external units via the

MIDI output.

MIDI THRU

Fig. 1.4: Stand-alone mode

1.3.2 USB mode (default)

This is the default setting when the device is turned on. If the

UMA25S is connected to a computer via USB, the keyboard

automatically switches to this mode. In the USB mode, you can

choose between 2 options: MIDI THRU or MIDI OUT.

1. USB mode with MIDI THRU (default):

Fig. 1.5: USB mode with MIDI THRU

In this mode, the keyboard messages are sent to the computer

via USB. The messages from the computer are transmitted to the

UMA25S (data reception) and simultaneously to all MIDI units

which are connected to MIDI OUT. This mode is ideal for playing

the keyboard and controlling further MIDI hardware (samplers,

rack synthesizers, etc.) with the sequencer.

1. Introduction

MIDI-keyboard number of keys	25 keys
Mac compatibility	Yes
Dimensions (WxDxH)	460 x 220 x 46 mm
Compatible operating systems	Mac OS X Windows XP/Vista
Interface	USB

Behringer U-Control UMA25S User Manual

Other manuals for Behringer U-Control UMA25S