Behringer U-Control UMX250 User Manual

ENGLISH
U-CONTROL UMX250 User Manual
12
Velocity Sensitivity4.2.10
The sensitivity of the UMX250 can be regulated so that the
velocity of the keys has an effect on the volume level.
Press the ASSIGN button and keep it pressed.1)
Use the number keys to enter the keyboard velocity 2)
(see Table 4.1).
Release the ASSIGN button.3)
Conrm your selection with ENTER. To discard your 4)
assignments either press the CANCEL key or the ASSIGN
button again.
The FACTORY RESET command4.2.11
Please proceed as follows to reset all UMX250 settings to their
factory defaults:
1) Press the ASSIGN button and keep it pressed.
2a) Press both OCTAVE SHIFT buttons for a temporary
FACTORY RESET. All currently modied control elements
will be reset to their factory defaults. However, the USER-
MEMORY remains as before and is not reset!
2b) Press keys (8) , (9) and (0) simultaneously for a complete
FACTORY RESET: Now not only the control elements of the
FACTORY MEMORY but also those of the USER MEMORY
will be overwritten.
3) Release the ASSIGN button. The ASSIGN LED stays on.
4) Conrm your selection with ENTER. If you do not want
to RESET the unit, either press the CANCEL key or the
ASSIGN button again.
Specifications5.
USB CONNECTIONS
Type Type B; USB1.1
MIDI CONNECTIONS
Type 5-pin DIN plug OUT
CONTROL ELEMENTS
Controller 1 control wheel with center reset
1 control wheel without center reset
8 rotary knobs
1 fader
Buttons 12 buttons
Keyboard 25 keys; velocity-sensitive
SWITCH PLUG
Foot pedal ¼" mono jack with automatic
polarity recognition
POWER SUPPLY
USB
Battery 3 x 1.5 Volt Mignon (Type “AA”)
Power connector 2 mm DC jack, negative center
9 V , 100 mA regulated
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
UK/Australia 230 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 – 60 Hz
Power consumption max. 0.9 W
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 8
15
/
32
" x 3
26
/
32
" x 19
15
/
32
"
(215 mm x 97 mm x 495 mm)
Weight approx. 4
30
/
32
lbs. (2.24 kg)
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or liiustrated.
KEYEFFECT ON KEY VELOCITY
OFF: velocity value is fixed to 110.
Change of key pressure has no effect on
volume level.
SOFT: key pressure is very sensitiv e; low
velocity changes create high changes in
volume level
MEDIUM: key pressure is “normal”; (very)
hard hit notes are (very) loud, (very) soft
hit notes produce (very) low volume
HA RD: key pressure is more unsusceptible
compared to all other settings
to invalid input
Table 4.1: Effect of RANGE denition on keyboard velocity

Behringer U-Control UMX250 Specifications