22 U-PHORIA UMC1820 Quick Start Guide 23
Speci cations
Input
Preamps 8 x MIDAS-designed
Type XLR / TRS combo connector (Mic/Line/Instrument), 2 front / 6 rear
Input level attenuation 8 x pad switch
Frequency response 10 Hz – 85 kHz (+0/-3 dB) / direct monitor
Impedance Mic in: 3 kΩ / Instrument in: 1 MΩ
Max. input level Mic: 11 dBu / Line: 11 dBu / Instrument: 18 dBu
Phantom power +48 V switchable inputs 1-4 and 5-8
Output
Type
8 x ¼ " TRS, line outputs
2 x ¼ " TRS, main outputs
2 x ¼ " TRS stereo, headphone outputs
Frequency response 10 Hz – 85 kHz (+0/-3 dB) / direct monitor
Max. output level
+16 dBu line outputs
+16 dBu main outputs
+21.5 dBu headphone outputs
System Data
Dynamic range 106 dB, A-weighted
Frequency response 10 Hz – 40 kHz (+0/-3 dB) @ 96 kHz sampling rate
Digital Audio I/O
Type
Coaxial: RCA – 1 In, 1 Out
Optical: TOSLINK – 1 In, 1 Out
Supported formats ADAT, S/PDIF, S/MUX
MIDI I/O
Type 5-pin DIN, 1 in / 1 out
Monitoring
Direct monitor control
Mix control (inputs/playback 1-2)
Source select (analog inputs 1-2/1-8)
Stereo/Mono select
Main L/R control Output Level 1/L – 2/R control, dim and mute switch
Headphones DJ cueing Monitor switches (monitor mix 1-2 / playback out 3-4)
Digital Processing
Converter resolution 24-bit
Supported sample rates 44.1, 48, 88.2, 96 kHz
Digital I/O Routing
S/PDIF selected (OPT I/O switch out)
RCA In = o
Optical In = S/PDIF (ch. 9-10)
RCA Out + Optical Out = S/PDIF (ch. 11-12)
ADAT selected (OPT I/O switch in)
RCA In = S/PDIF (ch. 9-10)
Optical In @ 96 / 88.2 kHz = S/MUX (ch. 11-14)
Optical In @ 48 / 44.1 kHz = ADAT (ch. 11-18)
RCA Out = S/PDIF (ch. 11-12)
Optical Out @ 96 / 88.2 kHz = S/MUX (ch. 13-16)
Optical Out @ 48 / 44.1 kHz = ADAT (ch. 13-20)
Computer Bus Connectivity
Type USB 2.0, type B
Software Support
Operating systems
Fully compatible with Windows XP or higher
Fully compatible with Mac OS 10.9 (Mavericks) or higher
For older OS X versions, the following restrictions apply:
10.8 (Mountain Lion) + 10.7 (Lion):
After changing the “OPT I/O” mode with the front panel switch, you must
refresh the OS X Audio-Midi-Setup window to get the correct I/O channel
numbers indicated.
10.6 (Snow Leopard):
The UMC1820 can only be used in S/PDIF mode (“OPT I/O” switch not pressed in).
ADAT operation is NOT supported by this OS X version.
10.5 + earlier versions are not supported
Drivers
Mac: No driver required (CoreAudio/CoreMIDI compliant)
Windows: 2 drivers are available:
one driver for Windows XP or Windows Vista
one driver for Windows 7 to 10
Download the correct driver for your system from behringer.com
Power Supply / Voltage
Voltage 12 V DC (from supplied AC/DC adapter)
Power consumption 20 W
Dimensions / Weight
Dimensions (H x W x D) 46 x 483 x 130 mm (1.8 x 19 x 5.1")
Weight 1.8 kg (4.0 lbs)
To Next Page
Loading...
