Behringer ULTRA-DI DI20 - Audio Connections

6 7ULTRA-DI DI20 ULTRA-DI DI20
3.2 Converting output signals of a keyboard, DJ-mixer, etc.
Fig. 3.2: DJ-mixer DI-box mixing console
This conguration is recommended when using a DJ-mixer or another
signal source, which sends an unbalanced line level signal. In addition,
if you need a separate monitor signal, the line level signal can be sent
to another amplier.
ULTRA-DI
DI20
Mic In
PRO MIXER
VMX200
L
R
In
In
Out
Out
EURORACK UB2222FX-PRO
4. Audio Connections
The Behringer ULTRA-DI DI20 features electronically servo-balanced
standard inputs and outputs. The circuit design is equipped with
automatic hum suppression for balanced signals and operates
problem-free even at high levels. Externally induced mains hum is
thus eciently suppressed. The servo function automatically detects
unbalanced pin connections and changes the nominal level internally
by 6 dB so that there is no dierence in level between input and
outputsignals.
Fig. 4.1: XLR connectors
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
12
3
output
1
2
3
Balanced use with XLR connectors