EasyManua.ls Logo

Behringer Ultramatch Pro SRC2496 User Manual

Behringer Ultramatch Pro SRC2496
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ENGLISH
Version 1.0 July 2002
Users Manual
ENGLISH
www.behringer.com
ULTRAMATCH PRO SRC2496

Other manuals for Behringer Ultramatch Pro SRC2496

Question and Answer IconNeed help?

Do you have a question about the Behringer Ultramatch Pro SRC2496 and is the answer not in the manual?

Behringer Ultramatch Pro SRC2496 Specifications

General IconGeneral
Digital audio coaxial in0
Digital audio optical in1
S/PDIF out portYes
I/O ports3x XLR In, 3x XLR Out, Toslink In, Toslink Out, BNC In, RCA In, RCA Out
Product colorBlack, Stainless steel
Operating voltage240 V
Power consumption (typical)15 W
Weight and Dimensions IconWeight and Dimensions
Depth217 mm
Width483 mm
Height44.5 mm
Weight2300 g

Summary

1. INTRODUCTION

1.1 The design concept

Explains the design philosophy and component selection for the product.

1.2 Before you begin

Provides essential pre-operation checks and setup advice, including packaging inspection and voltage verification.

2.1 Front panel of the ULTRAMATCH PRO SRC2496

2.1.1 Monitor and input sections

Details the monitor section for signal level adjustment and the input section for digital signal status LEDs.

2.1.2 Mode section

Explains the mode section for selecting between sampling rate converter and A/D-D/A converter functions.

2.1.3 Output section

Describes the output section controls for tailoring the digital output signal parameters.

2.2 Rear panel of the ULTRAMATCH PRO

3. APPLICATIONS

3.1 A/D and D/A conversion with the ULTRAMATCH PRO

Covers using the device as a high-grade A/D and D/A converter for preparing analog audio for digital processing.

3.2 Sample rate conversion

3.3 Removing copy protect information

3.4 Noise reduction with emphasis

3.5 Line booster, signal refresher

3.6 Correcting incorrect sample rates

3.7 Vari-speed application

3.8 Format converter

3.9 Format interface

3.10 Patchbay/splitter

4. TECHNICAL BACKGROUND

4.1 A short digression into digital sample rate conversion

Explains the principles of digital sample rate conversion and the processor's oversampling technique.

4.2 AES/EBU and S/PDIF standards

5. INSTALLATION

5.1 General connection notes

Discusses general connection principles for digital and analog interfaces, including grounding and adapters.

5.2 Analog inputs and outputs

Details the balanced XLR and unbalanced connections for analog signals, including pin assignments and signal flow.

5.3 Digital inputs and outputs

Covers digital connectivity options including XLR (AES/EBU), RCA (S/PDIF), and optical (Toslink) interfaces.

5.4 Headphones output

Explains the connection for the 1/4" TRS headphones output and provides safety advice for volume levels.

Related product manuals