Need help?Do you have a question about the Behringer Ultra-G and is the answer not in the manual?
General| Ground Lift | Yes |
|---|---|
| Channels | 1 |
| Input Impedance | 1 MΩ |
| Type | DI Box |
| Input | 1/4" TS |
| Output | XLR |
| Features | Ground lift switch |
| THD | 0.05% |
| Weight | 0.3 kg |
Controls the virtual 4x12" cabinet speaker simulation feature.
Breaks ground connection to eliminate hum and ground loops.
Balanced, mic level output for connecting to a console.
Important warning regarding pin connections for phantom power operation.
Location for installing or replacing the 9V battery.
Illuminates when the input signal level is too high.
Switches to increase operating range for high-level signals.
Advice on when and how to use PAD switches for optimal signal.
1/4" mono jack for connecting signal sources like guitars.
Direct output of the input signal for simultaneous routing.
Illustrates connecting a guitar directly to the console without an amp.
Shows how to connect bass guitars or keyboards to the console.
Converting unbalanced microphone signals to balanced outputs.
Capturing signals from an amplifier's loudspeaker output.
Detailed technical data including frequency response, noise, and dimensions.
Instructions for registering the product for extended warranty.
Details the manufacturer's warranty period and coverage.
Procedure for obtaining service and returning the product.
Rules and conditions governing warranty services.
Conditions not covered by the warranty, such as misuse or unauthorized repair.
Limitations on warranty transfer and claims for damages.
Buyer's statutory rights and national law considerations.
To Next Page