Beko BFC60EMW - Replacing the Oven Lamp

IBefore replacing the oven lamp, make sure
1'--=-...11: .. 1 hat the product is disconnected from mains
and cooled down in order to avoid the risk of
an electrical shock.
Hot surfaces may cause burns!
he oven lamp is a special electric light bulb
hat can resist up to 300 a c. See Technical
,__ •. specifications, page 12for details. Oven lamps
can be obtained from Authorised Service
Agents or technician with licence.
Position of lamp might vary from the figure.
he lamp used in this appliance is not suitable
or household room illumination. The intended
,__.
1
purpose of this lamp is to assist the user to
see foodstuffs.
28/EN
he lamps used in this appliance have to
ithstand extreme physical conditions such as
emperatures above 50 ac.
If your oven is equipped with a round lamp:
1. Disconnect the product from mains.
2. Turn the glass cover counter clockwise to remove
it.
If your oven lamp is of type (A) shown in the figure
below, remove it by rotating as shown and replace
it. If it is of type (B), pull and remove it as shown
in the i re and I it.
4. Install the glass cover.