Beko BFC60VMX1 - Easy Steam Cleaning

Catalytic walls
(fhis feature is optional. It may not exist on your
product.)
The inner side walls (A) and/or the rear wall (B) of your
product may be coated with catalytic enamel. Catalytic
walls have a light matte colour and a porous surface.
Catalytic walls of the oven should not be cleaned.
Porous surfaces of the catalytic walls are automatically
cleaned by absorbing and converting the spilled oil
and carbon
Easy Steam Cleaning
It ensures easy cleaning because the dirt (having
waited not for too long) is softened with the steam that
forms inside the oven and the water drops condensing
on the inner surfaces of the oven.
1. Remove all accessories inside the oven.
2. Pour 500 ml of water into the oven tray and place
the at the 2nd rack of the oven.
3. Set the oven to easy steam cleaning mode and
run at 1 ooac for 25 minutes.
4. Open the door and wipe the inner surfaces of the
oven with a damp sponge or cloth.
5. Use warm water with washing liquid, a soft cloth
or sponge to clean the persistent dirt and wipe it
with a dry cloth.
Clean oven door
To clean the oven door, use warm water with washing
liquid, a soft cloth or sponge to clean the product and
wipe it with a dry cloth.
Don't use any harsh abrasive cleaners or shar
metal scrapers for cleaning the oven door.
jlllloo-•·hey could scratch the surface and destroy the
glass.
28/EN
Removing the oven door
1 . Open the front door (1).
2. Open the clips at the hinge housing (2) on the
right and left hand sides of the front door by
1
2
3
i them down as illustrated in the i re.
Front door
Hinge
Oven
Move the front door to half -way.
Remove the front door by pulling it upwards to
release it from the right and left hinges.
• Steps carried out during removing process
1 should be performed in reverse order to install
,_._.the door. Do not forget to close the clips at the
hinge housing when reinstalling the door.
Removing the door inner glass
The inner glass panel of the oven door can be
removed for cleaning.
1 . Open the oven door.