Beko CEG5331X - Specific Issues and Fixes

36 / EN
Fully Automatic Coffee Machine / User Manual
6
Troubleshootng
Problem Cause Solution
The touch buttons are not
senstve
Not pressng the touch button
from the front drecton of the
applance
Press the lower bottom part of
the con of the touch button
from the front drecton of the
applance.
The applance takes too long
tme to warm up.
Excessve scale has bult up. Descale the applance.
The water tank s removed /
the water level s very low n
the water tank but have no
alert.
The area near the water tank
connector s wet.
Wpe the water around the
water tank connector
Internal drp tray s flled wth a
lot of water.
Coffee powder too fne whch
block the water to come out.
Adjust the coffee fneness
to bgger dot durng grnder
operaton.
Coffee s delvered too slowly
or a drop at a tme.
Coffee powder too fne whch
block the water to come out.
Adjust the coffee fneness
to bgger dot durng grnder
operaton.
Lack of bean ndcator flashes
but there s stll a lot of coffee
bean nsde the contaner.
Internal coffee powder outlet
s blocked.
Follow the steps n Cleanng
the coffee powder outlet.
No mlk foam out from the
machne
The automatc mlk frother
s drty or not assembled or
nstalled correctly
Clean the automatc mlk
frother and make sure t
s correctly assembled or
nstalled.