What to do if my Beko CWB 6441 WN Ventilation Hood does not work?
If your Beko Ventilation Hood isn't working, first, ensure your fuse is functional. If it's closed, make it work. Next, verify the electrical connection, ensuring the mains voltage is between 220-240 V. Also, check if other kitchen appliances are working to rule out a general power issue.
Why is the air intake of my Beko CWB 6441 WN Ventilation Hood poor?
Poor air intake in your Beko Ventilation Hood could be due to several factors. First, the aluminum oil filter should be cleaned at least once a month under normal conditions. Second, make sure the air vent flue is in the ''on'' position. Finally, if your product uses a carbon filter, it should be replaced every 3 months.
What to do if my Beko Ventilation Hood is not working?
If your Beko Ventilation Hood isn't working, start by checking the fuses and the electrical connection. Also, verify if other appliances in your kitchen are operating correctly.
Why is the light not working on my Beko Ventilation Hood?
If the illumination light on your Beko Ventilation Hood isn't working, you should check the electrical connection, inspect the lamp switch, and inspect the lamps themselves.
How to improve air inlet of Beko Ventilation Hood?
To improve the air inlet of your Beko Ventilation Hood, inspect the grease filter, check the air discharge flue, and inspect the carbon filter.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Number of Speeds | 3 |
| Lighting | LED |
| Filter Type | Aluminium |
| Number of Motors | 1 |
| Control Type | Push button |
| Color | White |
| Lighting efficiency class | A |
To Next Page
