Why is the air intake of my Beko CFB 9433 X poor?
If the air intake of your Beko Ventilation Hood is poor, you should: 1. Clean the aluminum filter at least once a month under normal conditions. 2. Ensure the air vent flue is in the 'on' position. 3. Replace the carbon filter every 3 months if your product uses one.
How to fix the lighting lamp on my Beko CFB 9433 X?
If the lighting lamp on your Beko Ventilation Hood isn't working, ensure the mains voltage is between 220-240 V. Also, check that the lamp switch is in the “on” position and that the lamps themselves are not faulty.
What to do if my Beko CFB 9433 X Ventilation Hood does not work?
If your Beko Ventilation Hood isn't working, start by checking your fuse to ensure it's functioning correctly. Also, verify that the mains voltage is between 220-240V and that other kitchen appliances are working, to confirm the electrical connection.
General| Type | Chimney |
|---|---|
| Width | 90 cm |
| Maximum extraction rate | 650 m³/h |
| Number of Speeds | 3 |
| Lighting | LED |
| Lighting efficiency class | A |
| Grease filtering efficiency class | C |
| Number of Motors | 1 |
| Control Type | Mechanical |
| Material | Stainless Steel |
| Filter Type | Aluminium |
| Noise Level | 65 dB |
To Next Page
