What to do if my Beko Ventilation Hood does not work?
If your Beko Ventilation Hood isn't working, start by checking your fuse to ensure it's functioning correctly. Also, verify that the mains voltage is between 220-240V and that other kitchen appliances are working, to confirm the electrical connection.
Why is the air intake of my Beko CFB 6433 X poor?
If the air intake of your Beko Ventilation Hood is poor, you should: 1. Clean the aluminum filter at least once a month under normal conditions. 2. Ensure the air vent flue is in the 'on' position. 3. Replace the carbon filter every 3 months if your product uses one.
How to fix the lighting lamp on my Beko Ventilation Hood?
If the lighting lamp on your Beko Ventilation Hood isn't working, check the following: 1. Ensure the mains voltage is between 220-240 V. 2. Confirm the lamp switch is in the “on” position. 3. Verify that the lamps themselves are not faulty.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Number of Speeds | 3 |
| Noise Level | 62 dB |
| Lighting | LED |
| Filter Type | Aluminium |
| Lighting Efficiency Class | A |
| Grease Filtering Efficiency Class | B |
| Energy Efficiency Class | A |
| Number of Bulbs | 2 |
| Colour | Stainless Steel |
To Next Page
