What to do if my Beko Ventilation Hood does not work?
If your Beko Ventilation Hood isn't working, there are a few things to check: * First, examine your fuse to ensure it's functioning correctly. Your fuse might be closed, make it work. * Next, verify the electrical connection, making sure the mains voltage is between 220-240V. * Finally, check if other kitchen appliances are working to rule out a broader electrical issue.
Why is the air intake of my Beko CFB 5432 W poor?
Poor air intake in your Beko Ventilation Hood can stem from a few causes: * The aluminum filter may need cleaning. Under normal conditions, it should be cleaned at least once a month. * The air vent flue might not be in the correct position. Ensure it is in the ''on'' position. * If your unit uses a carbon filter, it may need replacing. These filters should typically be changed every 3 months.
How to fix the lighting lamp if it does not work in my Beko CFB 5432 W Ventilation Hood?
If the lighting lamp in your Beko Ventilation Hood isn't working, consider the following: * Check the electrical connection to ensure the mains voltage is between 220-240V. * Verify that the lamp switch is in the “on” position. * Ensure that the lamps themselves are not faulty and need replacement.
General| Brand | Beko |
|---|---|
| Model | CFB 5432 W |
| Category | Ventilation Hood |
| Color | White |
| Width | 60 cm |
| Installation Type | Wall-mounted |
| Number of Motors | 1 |
| Number of Speeds | 3 |
| Number of Speed Settings | 3 |
| Control Type | Mechanical |
| Lighting | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Noise Level | 63 dB |
| Fluid dynamic efficiency class | F |
| Lighting efficiency class | G |
| Grease filtering efficiency class | C |
| Noise Level at Minimum Speed | 51 dB |
| Lighting Type | Incandescent |
| Number of Lamps | 1 |
| Filter Type | Aluminium grease filter |
To Next Page
