Beko DIN15212 - Scheduling the Washing Time

38 Dishwasher / User’s Manual/49 EN
Operating the product
Sound On / Interior Lighting On;–[Display P1]
Sound Off / Interior Lighting On;–[Display P2]
Sound On / Interior Lighting Off;–[Display P3]
Sound Off / Interior Lighting Off;-[Display P4]
3. You can turn ON or OFF the Warning
Sound/Interior Lighting feature with the
time delay key.
4. Turn off the machine with On/Off key to
save the changes.
C
After the "Interior Lighting ON"
is set, the interior lighting will
switch ON for 2 minutes if the
door is opened and switched
OFF after 2 minutes.
C
If "Interior Lighting OFF" is set
then interior lighting will not
switch ON.
Floor illumination
Warning to show that machine is
in washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
C
Floor illumination is activated
automatically when the
washing programme starts and
remains lit until the end of the
programme.
C
Floor illumination cannot be
cancelled by the user.
You can delay the start of the selected
programme until 9 hours.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key "3
hours" Time Delay indicator will start
flashing.
3. Set the desired time by pressing the
Time Delay key. Each press on the key
will increase up to 9 hours with 3-hour
increments.
4. Close the door of your machine after
setting the Time Delay. Once the delay
time is over, the selected programme
will start automatically.
C
The time delay will start
countdown with the closing
of the door after selecting the
Time Delay function.
C
If the door is opened while the
Time Delay function is active,
the countdown will be paused
and start icon will start to flash.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of time delay.
C
Programme and auxiliary
functions cannot be set/
changed after the programme
has started.
To cancel the Time Delay function
To cancel the process while the Time Delay
function is active the programme should be
canceled.
Scheduling the washing
time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.