Why my Beko DIN28431 Dishwasher does not start?
If your Beko Dishwasher isn't starting, make sure the power cable is properly plugged in. Also, check the fuses in your house to ensure they haven't blown. Confirm that the water inlet tap is open and that the dishwasher door is fully closed. Finally, be sure to press the On/Off button to turn the machine on.
Why are dishes not clean after using my Beko DIN28431?
If your Beko Dishwasher leaves dishes unclean, it could be due to several reasons. First, ensure dishes are loaded properly as described in the user manual. Select a program with a higher temperature and cycle time. Check that the impellers rotate freely and that their holes aren't clogged. Also, verify the filter system is clean and correctly installed. Avoid overloading the baskets and ensure your detergent is stored properly and used in sufficient amounts. Check the rinse aid level and make sure the detergent dispenser lid is closed tightly.
What to do if water remains in Beko DIN28431 after cycle?
If water remains in your Beko Dishwasher at the end of the program, check if the filter system or the discharge hose is clogged. If necessary, remove the discharge hose, clear any blockage, and reinsert it as shown in the user manual.
Why does my Beko DIN28431 smell bad?
If your Beko Dishwasher has a strange odor, the filters may be clogged; ensure you check and clean them regularly. Also, if you're not running the dishwasher immediately after loading, remove food remnants and run the Prewash program every 2 days. Leave the door slightly open to prevent odor buildup.
Why is there rust on dishes from my Beko DIN28431?
If you find rust, discoloration, or surface deterioration on dishes washed in your Beko Dishwasher, it could be due to salt leakage; be careful when filling the salt reservoir. Also, remove salty food remnants before loading dishes. Ensure your electrical installation is properly grounded. Avoid using bleach, and don't use metal items for unintended purposes. Low-quality stainless steel cutlery and already corroded items should not be washed in the dishwasher.
What to do if detergent remains in the Beko DIN28431 Dishwasher dispenser?
If detergent remains in the dispenser of your Beko Dishwasher, ensure the dispenser is dry before adding detergent and add detergent shortly before starting the wash. Make sure dishes aren't blocking the dispenser lid from opening or preventing water from entering. Avoid storing powder detergent in humid conditions. Also, check if the impeller holes are clogged.
Why are my kitchen utensils broken in Beko DIN28431 Dishwasher?
If kitchen utensils are broken in your Beko Dishwasher, make sure that you load the dishes as described in the user manual and do not overload the baskets in excess of their capacity.
Provides essential safety precautions for operating the dishwasher.
Details safety measures to protect children from potential hazards.
Lists technical details and compliance information for the appliance.
Guidelines for selecting a suitable and safe place for installation.
Instructions on how to connect the dishwasher to the water supply.
Details on how to connect the dishwasher's drain hose.
Instructions for making a safe electrical connection to the appliance.
Step-by-step instructions for filling the salt reservoir.
Explains the function of rinse aid and how to use it.
Guidance on properly loading dishes for optimal washing and drying.
Guides on how to select and start a washing programme.
Overview of available wash programs, their temperatures, and consumption.
Instructions on how to start the selected washing programme.
Steps to cancel a running washing programme.
Explains the salt indicator and when to refill the salt reservoir.
Explains the rinse aid indicator and when to refill rinse aid.
Instructions for cleaning the micro, coarse, and metal/plastic filters.
Instructions for cleaning the lower and upper impellers.
Common causes and solutions when the machine fails to start.
Troubleshooting steps for dishes not being cleaned properly.
Solutions for issues related to dishes not drying after a cycle.
Solutions for water left in the dishwasher after a cycle.
General| Cord length | 1.5 m |
|---|---|
| Display type | LCD |
| Product size | Full size (60 cm) |
| Tub material | Stainless steel |
| Custom panel-ready | - |
| Appliance placement | Fully built-in |
| Cutlery compartment type | Basket & drawer |
| Upper basket adjustable height | Yes |
| Cycle time | 227 min |
| Noise level | 42 dB |
| Delay start (max) | 24 h |
| Dishwashing programs | Auto, Eco 50°C, Glass/delicate, Intensive 70°C, Pre-wash, Quick |
| Left-on mode duration | 5 min |
| Number of place settings | 14 place settings |
| Number of washing programs | 8 |
| Number of temperature settings | 6 |
| Wi-Fi controlled | No |
| Current | 10 A |
| Connected load | 2100 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.3 W |
| Water consumption per cycle | 9.5 L |
| Energy consumption per cycle | 0.8 kWh |
| Package weight | 44100 g |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 598 mm |
| Height | 818 mm |
| Weight | 41100 g |
| Installation compartment depth | 661 mm |
| Installation compartment width | 644 mm |
| Installation compartment height | 859 mm |
To Next Page
