Why Beko DIS15014 doesn't start?
Your Beko dishwasher might not be starting due to several reasons. It could be that the power cable is unplugged, so ensure it's properly connected. Another possibility is a blown fuse in your house, so check your fuses. Also, make sure the water inlet tap is open and that the dishwasher door is fully closed. Finally, verify that you've pressed the On/Off button to turn the machine on.
How to fix Beko Dishwasher that leaves dishes not washed clean?
If your Beko dishwasher isn't cleaning dishes properly, several factors could be at play. Ensure dishes are loaded correctly as described in the user manual. Select a programme with a higher temperature and cycle time. Check that impellers rotate freely and that impeller holes aren't clogged. Also, verify that filters are clean and correctly installed. Avoid overloading the baskets. Store powder detergent properly in a closed container, and use enough detergent and rinse aid. Make sure the detergent dispenser lid is closed tightly.
Why my Beko Dishwasher does not start?
The Beko Dishwasher might not start because the power cable is unplugged. Ensure the power cable is properly plugged in. Another reason could be a blown fuse, so check the fuses in your house. Also, the water supply might be cut off; make sure the water inlet tap is open. The dishwasher door must be closed properly, and you need to turn on the machine by pressing the On/Off button.
Why are my dishes not clean after using my Beko Dishwasher?
Your Beko Dishwasher might leave dishes unclean if they aren't placed properly. Ensure you load the dishes as described in the user manual. The selected program may be unsuitable; try a program with a higher temperature and cycle time. Check if the impellers are stuck and rotate them freely by hand. Also, the impeller holes or filters might be clogged, requiring cleaning. Ensure the filters are installed correctly and that you're not overloading the baskets. The detergent might be stored improperly, or you might not be using enough; consider using tablet detergents. Check the rinse aid level and adjust if necessary. Finally, ensure the detergent dispenser lid is closed tightly.
What to do if Beko Dishwasher leaves water at the end of the programme?
If water remains in your Beko dishwasher after the cycle, it might be due to clogged filters. Check the filter system and clean it. Alternatively, the discharge hose could be clogged or blocked. Inspect the discharge hose and clear any blockages.
Why Beko DIS15014 leaves detergent in dispenser?
If detergent remains in the dispenser of your Beko dishwasher, ensure the dispenser is dry before adding detergent and add detergent shortly before starting the wash. Arrange dishes so they don't block the dispenser lid from opening or water from the impellers from entering. Store powder detergent in a closed container in a non-humid place. Check that the impeller holes are not clogged.
How to dry dishes better in my Beko Dishwasher?
If your Beko Dishwasher leaves dishes not dry, make sure that you place your dishes in a way that no water will accumulate in them.
What to do if water remains in my Beko DIS15014 after the cycle?
If water remains in your Beko Dishwasher at the end of the program, it could be due to clogged filters. Check and clean the filter system regularly. Alternatively, the discharge hose might be clogged or blocked. Inspect the hose and clear any blockages.
How to prevent rust on dishes in Beko DIS15014 Dishwasher?
To prevent rust and discoloration on dishes in your Beko dishwasher: ensure there isn't salt leakage by carefully filling the salt reservoir and closing the lid tightly; run a prewash cycle to remove spilled salt. Also, remove salty food remnants before washing. Check if your dishwasher is properly grounded to prevent static electricity. Avoid using intensive cleansers like bleach. Do not use metal items for unintended purposes. Be aware that low-quality stainless steel cutlery is prone to corrosion and should not be washed in the dishwasher. Avoid washing already corroded items in the dishwasher.
How to get rid of odour in Beko DIS15014?
To eliminate odors in your Beko dishwasher, start by checking and cleaning the filter system. If you're not running the dishwasher immediately after loading, remove food remnants and run the Prewash programme without detergent every 2 days. Leave the door slightly open to prevent odor buildup. You might also consider using commercial odor removers or machine cleaners.
General| Type | Built-in |
|---|---|
| Appliance placement | Built-in |
| Size | Full-size |
| Noise Level | 49 dB |
| Number of Washing Programs | 5 |
| AquaStop Function | Yes |
| Width | 60 cm |
| Depth | 55 cm |
| Control panel colour | Black |
| Washing Programs | Eco, Intensive, Quick |
| Drying System | Condensation |
To Next Page
