INTRODUCTION 1
1. IMPORTANT SAFETY INSTRUCTIONS 1
1.1 INSPECT THE DISHWASHER 2
2. TOOLS WHICH MAY BE NEEDED 3
3. MATERIALS WHICH MAY BE NEEDED 3
4. MATERIALS SUPPLIED 4
4.1 PARTS SUPPLIED 4
4.2 MANUAL BAG 4
4.3 DISHWASHER PARTS BAG 1 4
4.4 DISHWASHER PARTS BAG 2 4
4.5 PARTS ATTACHED TO THE REAR OF THE DISHWASHER 4
5. DISHWASHER SPECIFICATIONS 5
5.1 TECHNICAL FEATURES 6
6. ENCLOSURE PREPARATION 7
6.1 ELECTRICAL PREPARATION 7
6.2 PREPARATION FOR INSTALLING MOUNTING BRACKETS 7
6.3 ADJUSTING HEIGHT 10
6.4 INSTALLING THE SIDE TRIM STRIPS 11
6.5 PREPARING THE WATER CONNECTION (A) 11
6.6 DRAIN PREPARATION 12
6.7 STEAM PROTECTION FOIL 14
7. PLACEMENT OF DISHWASHER INTO THE OPENING 15
7.1 DRAIN HOSE CONNECTION, WATER SUPPLY & ELECTRICAL CONNECTIONS 15
7.2 READJUSTING FOOT LEVELS 18
7.3 ADJUSTING THE MOVABLE TOE KICK 18
7.4 FIXING THE CABINET TO THE COUNTER 20
7.5 PREPARING THE TIMBER DOOR 22
7.6 PREPARING THE PRODUCT DOOR 23
7.9 INSTALLING THE TIMBER DOOR 24
7.10 FIXING THE TIMBER DOOR 24
7.11 FIXING THE TIMBER DOOR 25
7.12 ADJUSTING THE KICK PLATE 25
7.13 CONNECTION 26
8. INSTALLER CHECKLIST 27
9. SELF HELP HINTS: 27
To prevent accidents, which could cause serious injury or death, as well
as machine damage read these instructions before installation and / or
use.
To Next Page
Loading...
