Why is the temperature in my Beko DN162220X Refrigerator too high?
If the temperature in your Beko Refrigerator is too high, adjust the fridge or freezer temperatures and wait for them to reach a sufficient level. Avoid opening the doors frequently, ensure they are completely closed, and do not put hot food inside.
Why is food freezing in the drawers of my Beko DN162220X?
If food kept in the fridge compartment drawers of your Beko Refrigerator is freezing, adjust the fridge temperature to a lower value and check.
What to do if the compressor is not running in my Beko DN162220X Refrigerator?
If the compressor in your Beko Refrigerator isn't running, it could be due to a few reasons. The protective thermic of the compressor might blow out during power failures; the refrigerator should restart in about 6 minutes. It could also be in a defrost cycle, which is normal for automatic defrosting refrigerators. Ensure the refrigerator is properly plugged into the socket and that a suitable temperature value is selected. The refrigerator should return to normal operation when the power restores.
Why is there condensation on the outside of my Beko DN162220X?
Condensation on the exterior of your Beko Refrigerator or between the doors is normal in humid weather. The condensation will disappear as the humidity decreases.
What if my Beko DN162220X is not plugged in?
Make sure that the plug of your Beko Refrigerator is fit into the socket.
Why does my Beko Refrigerator whistle?
A whistling sound from your Beko Refrigerator is normal and not a fault.
What to do if my Beko DN162220X Refrigerator does not operate?
If your Beko Refrigerator isn't working, first ensure the plug is securely inserted into the socket. Then, check the fuse of the socket your refrigerator is connected to, and the main fuse, to see if they have blown. Also, make sure that the thermostat is set to a suitable level. Avoid placing the refrigerator in environments where the temperature drops below 10 °C. Ensure the door is closed properly and avoid storing food with liquid content in open containers.
Why is my Beko DN162220X not working?
If your Beko Refrigerator isn't working, first ensure it's properly plugged into the socket. Then, check the fuse of the socket or the main fuse, as they may have blown out. Also, avoid installing the refrigerator in places where the temperature falls below 10 °C. Other things to consider: * Avoid frequently opening and closing the door. * Do not install the refrigerator in highly humid places. * Avoid storing food with liquid content in open containers. * Ensure the refrigerator door is closed properly. * Set the thermostat to a suitable level.
Why is my Beko DN162220X making more noise than usual?
Increased operation noise when your Beko Refrigerator is running is normal and not a fault.
Why is the temperature too high in my Beko Refrigerator?
If the temperature in your Beko Refrigerator is too high, ensure that the cooler compartment temperature isn't set too high, as this affects the freezer. Allow time for the temperature to adjust after changing settings. Avoid frequent door openings and ensure the door is fully closed. Remember that a recently plugged-in refrigerator or newly added food takes longer to cool. Avoid placing hot food inside.
General| Model Number | DN162220X |
|---|---|
| Appliance placement | Freestanding |
| Product colour | Stainless Steel |
| Built-in display | Yes |
| Display type | LED |
| Refrigerant | R600a |
| Freezing capacity | 4 kg/24h |
| No Frost (freezer) | Yes |
| Ice cube tray | Yes |
| No Frost (fridge) | Yes |
| Multi-Airflow system (fridge) | Yes |
| Fridge interior light | Yes |
| Lamp type | LED |
| Number of fridge shelves/baskets | 3 |
| Number of vegetable drawers | 1 |
| Egg balcony | Yes |
| Bottle rack | Yes |
| Fresh zone compartment | No |
| Climate class | SN-T |
| Noise level | 39 dB |
| Water dispenser | No |
| Energy efficiency class | A+ |
| Width | 60 cm |
| Number of Doors | 2 |
| Star rating | 4-star |
To Next Page
