Beko EV 5140+ - Starting the Programme; Programme Operation and Control

60 / EN
Washing Machine / User’s Manual
4.7 Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupofthe
programmewillturnon.
Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicatorwiththelights"Running"and
"End/Cancel".
C
INFORMATIONS
Ifthemachinedoesnotpasstothespinningstep,automatic
unbalanced load detection system might have been activated due to
the unbalanced distribution of the laundry in the machine.
4.8 Loading door lock
Thereisalockingsystemontheloadingdoorofthemachine
thatpreventsopeningofthedoorincaseswhenthewater
level is unsuitable.
Ifyouwanttoopenloadingdoorwhenthemachineisinuse,
press"Start/Pause"buttontopausethemachine."Door
Open"lightwillstartflashingwhenthemachineisswitched
toPausemode.Machinechecksthelevelofthewaterinside.
Ifthelevelissuitable,"DoorOpen"lightilluminatessteadily
within1-2minutesandtheloadingdoorcanbeopened.
Ifthelevelisunsuitable,"DoorOpen"lightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theloadingdoorwhenthe"DoorOpen"lightisoff,you
have to cancel the current programme; see "Cancelling the
programme".
Switching the machine to pause mode
Pressthe"Start/Pause"buttontoswitchthemachineto
pausemodewhileaprogrammeisrunning."Running"light
startsflashingontheProgrammeFollow-upindicatortoshow
thatthemachinehasbeenswitchedtothepausemode.
When the loading door is ready to be opened, "Door Open"
lightwillilluminatecontinuously.
Adding or taking out laundry
Press"Start/Pause"buttontoswitchthemachinetopause
mode.Whenthemachineisswitchedtopausemode,
"Running" light flashes. Wait until the Loading Door can be
opened. Open the Loading Door and add or take out the
laundry.
ClosetheLoadingDoor.Press"Start/Pause"buttontostart
the machine.
C
INFORMATIONS
Thedoorcanbeopenedifthewaterlevelissuitable.Dooropen
symbolflashesuntiltheloadingdoorgetsreadytobeopened.The
symbol’slightissteadywhenthedoorisreadytoopen.Youcan
open the door to add/take out laundry.
4.9 Cancelling the programme
Tocanceltheprogramme,turntheProgrammeSelectionknob
toselectanotherprogramme.Previousprogrammewillbe
cancelled."End/Cancel"lightwillflashcontinuouslytonotify
that the programme has been cancelled.
C
INFORMATIONS
Ifyoustartanewprogrammeaftercancellingthepreviousone,
thisnewprogrammewillstartwithoutdrainingthewaterinthe
machine.
Ifyoumustcertainlyopentheloadingdoorwhenthe“Door
Open”lightisoff,youneedtouse“Spin+Pump”programme.See
“Spin+Pump”
Re-spinning the laundry
Unbalanced load control system can prevent spinning
becauseofunbalancedloadoflaundryinthemachine.Ifyou
wouldliketospinagain:
Rearrangethelaundryinthemachine.SelectSpin+Pump
programmeandpress“Start/Pause"button.
4.10 End of programme
"End/Cancel"lightontheprogrammefollow-upindicatorwill
light up once the programme comes to an end; and "Door
Open" symbol flashes for 1-2 minutes until the door is ready
to open. When "Door Open" symbol is steadily illuminated, the
door can be opened.
Toturnoffthemachine,turnprogramselectionknobto"On
/Off"position.Takeoutyourlaundryandclosetheloading
door.Themachinewillbereadyforthenextrun.
4.11 Door Open
"DoorOpen"symbolisilluminatedwhenthedoorisready
toopen.Itflashesuntilthedoorgetsreadytoopen.Ifthe
"Door Open" symbol is not illuminated, do not force the door
toopen.Thesymbol'slightissteadywhenthedoorisready
to open.
4.12 Your machine is equipped
with a “Standby Mode”
Incaseofnotstartinganyprogrammeorwaitingwithout
makinganyotheroperationwhenthemachineisturnedon
byOn/Offbuttonandwhileitisinselectionsteporifnoother
operationisperformedapproximately2minutesafterthe
programme you selected has come to an end, your machine
willautomaticallyswitchtoenergysavingmode.Brightnessof
indicatorlightswilldecrease.Also,ifyourproductisequipped
withadisplayshowingtheprogrammeduration,thisdisplay
willcompletelyturnoff.IncaseofrotatingtheProgramme
Selectionknoborpressinganybutton,lightsanddisplay
willrestoretotheirpreviouscondition.Yourselectionsmade
whileexitingtheenergysavingmodemaychange.Check
the appropriateness of your selections before starting the
programme.Readjustifnecessary.Thisisnotafault.